论文部分内容阅读
1下水田前的检查1水田旋耕机各零部件是否齐全,完好。缺少的要配齐,损坏的要修复或更换。2紧固水田旋耕机上各连接螺栓。特别是旋耕机犁刀与刀座的紧固螺栓,松动的要拧紧。3传动箱链条的松紧度要合适,过松的要调整,磨损严重或损坏的要修复更换。4传动箱中要加足润滑油,传动轴两端,轴承要加注黄油。2田间作业注意事项1根据田块形状大小,选择作业路线和作业档位。一般手拖用Ⅱ挡,旋耕机刀轴用高速。2起步时,先将旋耕机下降至接近田泥表面,然后结合动力输出轴,使旋耕机正常运转后,再
1 before the paddy field inspection 1 paddy field rotary machine parts are complete, intact. To be missing, to repair or replace damaged. 2 Fasten the connecting bolts on the paddy field rotary cultivator. In particular, rotary tillage coulter and knife block fastening bolts, loose to tighten. 3 gear box tightness should be appropriate, too loose to be adjusted, serious or damaged wear and tear to repair and replacement. 4 gearbox to add enough oil, both ends of the drive shaft, the bearings to be filled with butter. 2 Field work matters needing attention 1 According to the size of field shape, choose the work route and work gear. General hand drag Ⅱ block, rotary tiller shaft with high speed. 2 start, the first rotary tiller down to near the mud surface, and then combined with power output shaft, rotary tiller normal operation, and then