论文部分内容阅读
对滑片式空气压缩机工作时的压力状态和功率组成进行分析研究,并通过与应用压力温度传感器和电流表的检测方法得到的试验数据进行比较来验证研究结果。在理论分析中,压力平衡状态被分成6个主要部分,功率组成分成4个主要部分,对每部分的压力和功率过程进行分析,建立理论计算模型,分别求解得到各个部分的参数:为验证理论分析的有效性,对两种不同类型压缩机在正常工作条件下的内部工作状态进行测试;将计算结果与试验数据进行比较后的结果表明,两者有较好的一致性,因此研究结果可用来预测滑片式压缩机的工作状态。
The pressure state and power composition of the vane air compressor are analyzed and compared with the test data obtained by using the pressure and temperature sensor and the ammeter detection method to verify the research results. In the theoretical analysis, the pressure balance state is divided into six main parts, the power component is divided into four main parts, each part of the pressure and power process analysis, the establishment of theoretical calculation model, respectively, to get the parameters of each part: In order to verify the theory The effectiveness of the analysis is tested on the internal working conditions of two different types of compressors under normal operating conditions. The results of the comparison between the calculated and experimental data show that the two are in good agreement and the results are available To predict the vane compressor working condition.