论文部分内容阅读
The microstructural development of bimodal high density polyethylene subjected to tensile deformation was investigated as a function of strain after annealing at different temperatures by means of a scanning synchrotron small angle X-ray scattering (SAXS) technique.Two different deformation mechanisms were activated in sequence upon tensile deformation:intralamellar slipping of crystalline blocks dominates the deformation behavior at small deformations whereas a stress-induced crystalline block fragmentation and recrystallization process occurs at a critical strain yielding new crystallites with the molecular chains preferentially oriented along the drawing direction.The critical strain associated with the lamellar-to-fibrillar transition was found to be ca.0.9 in bimodal sample,which is significantly larger than that observed for unimodal high-density polyethylene (0.4).This observation is primarily due to the fact that the bimodal sample possesses a greater mobility of the amorphous phase and thereby a reduced modulus of the entangled amorphous network.The conclusion of the mobility of the amorphous phase as a determining factor for the critical strain was further proven by the 1H-NMR T2 relaxation time.All these findings contribute to our understanding of the excellent slow crack growth resistance of bimodal polyethylene for pipe application.