论文部分内容阅读
西安光机所的主攻方向之一是研制各种类型的高速摄影机。对这些仪器研究的最终目的是定型推广,投入批量生产,并在实践中普及、提高相机的性能,为四化建设服务。这是科技工作者义不容辞的责任。对于35毫米棱镜补偿式高速摄影机的研制开始于1967～1970年(四年)称102—A。1970～1977年(七年)称102—B。1979～1983年称102—C。本文简单介绍四个问题:一、技术改进工作(102—C)的提出;二、分析问题抓住主要矛盾—修改片道;三、第三代相机102—C在120—B上进行了改进而提高了画幅的稳定性;四、对这台相机进一步发展的设想。
Xi’an Institute of light one of the main direction is the development of various types of high-speed cameras. The ultimate goal of the research on these instruments is stereotypes promotion, put into mass production, and popularize in practice, improve the performance of the camera, and serve the four modernizations. This is an unshirkable responsibility of science and technology workers. The development of 35 mm prismatic compensated high-speed cameras began in 1967-1970 (four years) as 102-A. 1970 ~ 1977 (seven years) said 102-B. From 1979 to 1983, it was called 102-C. This article briefly describes four issues: First, the technical improvement work (102-C) proposed; Second, the analysis of the problem to seize the main contradiction - modify the channel; Third, the third generation of the camera 102-C in the 120-B was improved and Improve the stability of the frame; Fourth, the further development of this camera idea.