论文部分内容阅读
1. 马钢公司设备诊断工作概况 根据冶金部机动司的要求,我公司于1985年11月,在机动部设立“设备诊断室”,在部机动司和设备研究所的指导下,我公司的设备诊断工作得到较快的发展, 我公司设备诊断经历两个阶段。第一阶段为准备阶段,主要宣传设备诊断技术,并在试点设备上摸索经验;第二阶段为推广阶段,在冶金厂矿推广诊断技术,并进行考核,使推广工作带有强制性。 在两阶段中,我公司坚持抓组织,仪器、技术培训三落实,除在机动部设立设备诊断室外,各厂矿配有状态监测员,组成“公司—厂矿”二级诊断网;在机动部诊断室配置振动分析、红外成像,现场动平
1. Maanshan Iron and Steel Company Equipment Diagnostics Overview According to the requirements of the Ministry of Metallurgical Mobility Division, our company in November 1985, the Department of Maneuver set up “equipment diagnosis room”, under the guidance of the Ministry of Mobility Division and the Institute of equipment, our company’s Equipment diagnostics get faster development, our company equipment diagnosis goes through two stages. The first phase is the preparation phase, which mainly publicizes the equipment diagnosis technology and groping the experience on the pilot equipments. The second phase is the promotion phase, which promotes the diagnosis technology in the metallurgical factories and mines and conducts the examination so that the promotion work is mandatory. In the two phases, our company insisted on the implementation of organization, equipment and technical training. In addition to the equipment diagnosis room set up in the maneuver department, the factories and mines equipped with status monitors to form the secondary diagnosis network of “Company - Factory and Mine” Room configuration vibration analysis, infrared imaging, field level