论文部分内容阅读
液压滑升模板是现浇混凝土和钢筋混凝土工程施工机械化程度高、速度快、成本较低的一种混凝土成型施工工艺,在国内外已被广泛运用。针对不同类型的工程和不同的混凝土外表面形式,按模板构造和拆装运动方式方法不同,又分为滑模、倒模、升模、爬模等不同的形式,它们虽然形式方法不同,但目的是一致的,只是在模板脱离混凝土时才显示出各自不同的格式和优缺点。滑模法是将模板一次组装成型,连续浇灌滑升施工,其技术经济效益最佳,但因工程类型不同若不能连续滑升施工而要停歇一段时间时,就会出现摩阻力加大而带来提升的困难,并将出现支撑杆弯曲、或提升不动,或把混凝土拉裂夹带,或把整块混凝土拔起等现象,对工程质量极为不
Hydraulic sliding formwork is a kind of concrete molding construction technology with high mechanization degree, high speed and low cost for construction of cast-in-place concrete and reinforced concrete. It has been widely used at home and abroad. For different types of projects and different forms of concrete exterior surfaces, according to the method of template construction and disassembly movement methods, it is divided into different forms, such as sliding mode, inverted mode, lift mode, and climb mode. Although they differ in form and method, The purpose is the same, but only show the different formats, advantages and disadvantages of the template when it is out of concrete. Slip-form method is a one-time assembly of the template, continuous watering and sliding construction, the best technical and economic benefits, but if the type of project can not be continuous sliding construction to stop for a period of time, there will be increased friction resistance with In order to improve the difficulty, there will be bending or lifting of the support bar, or cracking of the concrete, or the pulling up of the concrete, which is extremely inconsistent with the quality of the project.