论文部分内容阅读
有些同志修理车床溜板的方法是,先根据床身导轨刮研溜板下导轨,然后再刮研溜板上导轨。误差靠修刮上导轨来保证上、下导轨的不垂直度、溜板箱安装面的倾斜度等。这种修理方法是不正确的,它可能造成多次返工,或者使车床的操作性能下降,如刀架下滑座丝杆中心线与上导轨不平行,刀架下滑座移动时有紧松,纵向行走小齿轮与
Some comrades repair lathe slide method is, according to the first bed scraping guide rails under the slide plate, and then scraping the slide on the slide rail. The error is repaired by scraping the upper rail to ensure the verticality of the upper rail and the lower rail and the inclination of the mounting surface of the slide box. This method of repair is not correct, it may cause multiple rework, or to reduce the operating performance of the lathe, such as the carriage under the carriage screw center line and the upper rail is not parallel, the carriage carriage slide tight loose, vertical Walking pinion with