论文部分内容阅读
相信小时侯大家都玩过积本,把散落的几部分组合成自己喜欢的组合,相信每个人都玩得乐此不疲。8月底,当我在 APC 测试实验室看到它新推出的 UPS——PowerStruXure(以下简称为 PSX),简单的讲解之后,我自己甚至可以在很短的时间内组合一台大型的 UPS,那种感觉就像小时候搭积木一样。不同于其他产品,PSX 由四大组件组成:机柜、配电单元、环境监测、电气/数据电缆布线。PSX 中使用的 UPS、电池都采用 U 式设计,都安装在机柜中,而且无需改锥就可拆卸。根据功率的大小,UPS 可配置为 Symmtera 或 Silcon,从12K vA、40K vA 的 Symmtera 到160K vA～1280KvA 的 Silcon。电池也同样可以根据功率的大小,自由调配。奇怪的是,PSX 不再像以往的 UPS 那样,需
I believe we all played a small plot, the scattered part of the portfolio into their favorite combination, I believe everyone had fun bored. At the end of August, when I saw the new UPS - PowerStruXure (hereafter referred to as PSX) in the APC test lab, I could even assemble a large UPS myself in a very short time after a brief explanation It feels like building a child like a child. Unlike other products, the PSX consists of four major components: cabinets, power distribution units, environmental monitoring, electrical / data cabling. The UPS used in the PSX, the batteries are U-shaped design, are installed in the cabinet, and can be removed without screwdriver. Depending on the size of the power, the UPS can be configured as Symmtera or Silcon from 12mm vA, 40mm vA Symmtera to 160K vA ~ 1280K vA Silcon. The same battery can also be free to deploy according to the size of the power. Strangely enough, the PSX is no longer as needed as the previous UPS