论文部分内容阅读
烧结普通砖的规格尺寸能否符合GB5101中的技术要求,坯体的规格尺寸,干燥的工艺制度,焙烧时码窑形式及烧成温度等一系列技术参数都起一定的作用.但坯体的规格尺寸首先影响着这一外观指标.坯体规格切割设备包括安装在切坯机龙门架上的上下规格板及靠坯台.3个零件上的钢丝槽之间的长度距离,直接影响到坯体的厚度.而3个零件钢丝槽又是分别进行划线、加工而成.怎样保证钢丝槽之间的公差尺寸达到±0.05mm的精确度.如大于此公差,务必产生断钢丝或坯体厚度尺寸不一致的现象.根据近几年的了解,有一部分砖机制造厂或有维修能力的砖厂机修车间在制造切割零件划线时大都使用分节规划线,以图纸上要求的间隔尺寸逐次移动两脚做为基点进行制做.此种做法,很容易产生
The specification size of sintered ordinary bricks can meet the technical requirements in GB5101, the specification and size of the blanks, the drying process system, the kiln type and firing temperature during roasting, and a series of technical parameters all play a role. However, the blanks The specification size first affects this appearance indicator. The blank specification cutting equipment includes the upper and lower specification plates installed on the gantry of the cutting machine and the distance between the wire slots on the blank table. The three parts are directly connected to each other. Thickness of the body. The wire grooves of the 3 parts are separately scribed and machined. How to ensure that the tolerances between the wire grooves are ±0.05 mm in accuracy. If the tolerance is greater than this tolerance, break wires or blanks must be produced. The phenomenon of inconsistent thickness and thickness. According to the understanding of recent years, a part of a brick factory or a repair workshop of a brick factory with maintenance capability often uses a section planning line when making cuts for cutting parts. Move two feet as base points. This practice is easy to produce.