【摘 要】
：
The development of hypersonic precooled combined cycle engine provides a reliable power system for the future intercontinental navigation and reusable space orbital transportation.The compact heat exchanger precooler is the key component of the cooling cy
【机 构】
：
School of Mechanical Engineering and Automation,Beihang University,Beijing 100191,China
论文部分内容阅读
The development of hypersonic precooled combined cycle engine provides a reliable power system for the future intercontinental navigation and reusable space orbital transportation.The compact heat exchanger precooler is the key component of the cooling cycle system,which pro-vides efficient heat management for the hypersonic engine.This investigation mainly focused on the manufacturing process of precooler,and the typical structure of the precooler,ultrathin-walled cap-illary structure,was facilitated by the vacuum brazing using the particle reinforced composite filler alloy.The effects of different types and contents of the reinforced particle on the spreading beha-viour,microstructural evolution,mechanical performance changes were investigated in detail.Dur-ing the cooling process,the nucleation and growth of the γ-Ni solid solution on the surface of the reinforced particles was the main reason for the microstructure homogenization.Compared to the Ni particles,the more obvious mechanical properties improvement could be achieved by using IN718 particles reinforced composite filler alloy.The tensile strength and elongation of the brazed ultrathin-walled structure present 9.36％ and 47.27％ higher than that using initial filler alloy.Moreover,the micro-hardness distribution result revealed that the reinforced particles reduced the overall micro-hardness of the brazed region,dispersed the eutectic structure and increased the hardness dispersion,which would reduce the stress concentration tendency and improve the structural properties.
其他文献
An experimental study was conducted on turbulent separation behaviors induced by blunt fins with different sweep angles at Mach number 6.0.The Nano-particle based Planar Laser Scattering technique (NPLS) was applied to visualize the flowfield,complemented
The transition process within a Laminar Separation Bubble (LSB) that formed on a com-pressor blade surface was investigated using Large Eddy Simulations (LESs) at a Reynolds number of 1.5 × 105 and incidence angles of 0°,+ 3°,and + 5°.The vortex dynamics
With the improvement of the accuracy of the inertial system,the influence of the dis-turbing gravity field on the accuracy of long-range rocket has become increasingly prominent.How-ever,in actual engineering,there are problems of low accuracy and being t
The ultrahigh strength 300M steel has been commonly used in the manufacture of air-craft landing gear and rotor shaft parts due to its excellent mechanical properties.Creep feed grind-ing is one of the essential operations during the whole component manuf
Space swarms,enabled by the miniaturization of spacecraft,have the potential capability to lower costs,increase efficiencies,and broaden the horizons of space missions.The formation con-trol problem of large-scale spacecraft swarms flying around an ellipt
The considerable uncertainty in mechanical properties of composite bolted joints not only prevents advanced composite materials from efficient applications,but also threatens the safety and reliability of the aircraft structures.In this paper,the uncertai
Uncontrolled residual stresses have significant effects on the service time and defects of the spun parts.Nowadays,X-Ray Diffraction (XRD) method has been widely used in the residual stress measurement of industry products with different forming processes
To address deeper understandings about the aero-thermal performance of an integrating infrared suppressor under more realistic situations,a numerical investigation is motivated in the cur-rent study,concerning the effects of forward-flight speed on exhaus
This research develops an accurate and efficient method for the Perspective-n-Line (PnL)problem.The developed method addresses and solves PnL via exploiting the problem\'s geometry in a non-linear least squares fashion.Specifically,by representing the r
The nickel-based superalloy Inconel 718 is treated with Coupled Ultrasonic and Electric Pulse Treatment (CUEPT),and the surface grain is refined from the average size of 9550.0 nm to 287.9,216.3,150.5,126.3,25.8 nm by different effective treatment current