论文部分内容阅读
Objective:This study deals with the effect of phosphoric acid etching and conditioning on enamel micro-tensile bond strengths(μTBSs)of conventional and resin-modified glass ionomer cements(GICs/RMGICs).Methods:Forty-eight bovine incisors were prepared into rectangular blocks.Highly-polished labial enamel surfaces were either acid-etched,conditioned with liquids of cements,or not further treated(control).Subsequently,two matching pre-treated enamel surfaces were cemented together with one of four cements[two GICs:Fuji I(GC),Ketac Cem Easymix(3M ESPE);two RMGICs:Fuji Plus(GC),RelyX Luting(3M ESPE)]in preparation forμTBS tests.Pre-treated enamel surfaces and cement-enamel interfaces were analyzed by scanning electron microscopy(SEM).Results:Phosphoric acid etching significantly increased the enamelμTBS of GICs/RMGICs.Conditioning with the liquids of the cements produced significantly weaker or equivalent enamelμTBS compared to the control.Regardless of etching,RMGICs yielded stronger enamelμTBS than GICs.A visible hybrid layer was found at certain enamelcement interfaces of the etched enamels.Conclusions:Phosphoric acid etching significantly increased the enamelμTBSs of GICs/RMGICs.Phosphoric acid etching should be recommended to etch the enamel margins before the cementation of the prostheses such as inlays and onlays,using GICs/RMGICs to improve the bond strengths.RMGICs provided stronger enamel bond strength than GICs and conditioning did not increase enamel bond strength.
Objective: This study deals with the effect of phosphoric acid etching and conditioning on enamel micro-tensile bond strengths (μTBSs) of conventional and resin-modified glass ionomer cements (GICs / RMGICs). Methods: Forty-eight bovine incisors were prepared into rectangular Highly-polished labial enamel surfaces were either acid-etched, conditioned with liquids of cements, or not further treated (control). Subsequently, two matching pre-treated enamel surfaces were cemented together with one of four cements [two GICs: Fuji Two GMGs: Fuji Plus (GC), RelyX Luting (3M ESPE)] in preparation for μTBS tests. Pre-treated enamel surfaces and cement-enamel interfaces were analyzed by scanning electron microscopy (SEM) .Results: Phosphoric acid etching significantly increased the enamelμTBS of GICs / RMGICs.Conditioning with the liquids of the cements produced significantly weaker or equivalent enamelμTBS compared to the control .Regardless of etching, RMGICs yielded stronger enamelμTBS than GICs.A visible hybrid layer was found at certain enamelcement interfaces of the etched enamels.Conclusions: Phosphoric acid etching significantly increased the enamelμTBSs of GICs / RMGICs.Phosphoric acid etching should be recommended to etch the enamel margins before the cementation of the prostheses such as in inlays and onlays, using GICs / RMGICs to improve the bond strengths.RMGICs provided stronger enamel bond strength than GICs and conditioning did not increase enamel bond strength.