【摘 要】
：
2.98 kGy/h (1007 h) gamma irradiation and 90 ℃ (2000 h) thermal aging were exerted to X65 grade low carbon steel buried in Gaomiaozi bentonite containing 17 wt％ Beishan groundwater.The average corrosion rate of X65 low carbon steel was measured.The elemen
【机 构】
：
Key Laboratory of Nuclear Materials and Safety Assessment,Institute of Metal Research, Chinese Acade
论文部分内容阅读
2.98 kGy/h (1007 h) gamma irradiation and 90 ℃ (2000 h) thermal aging were exerted to X65 grade low carbon steel buried in Gaomiaozi bentonite containing 17 wt％ Beishan groundwater.The average corrosion rate of X65 low carbon steel was measured.The elemental and phase distribution on cross section was characterized by using electron probe micro-analysis,high-resolution X-ray diffraction,and micro-X-ray diffraction.The following conclusions can be made:the average aerobic corrosion rate of the carbon steel is (45.16 ± 1.53) μm/year.Taking the original surface as boundary,the corrosion scale is divided into an internal dense product layer (DPL) mainly composed of Fe3O4 with segregated FeCO3 at the corrosion front and an external DPL mainly composed of Fe3O4 with segregated α-Fe2O3 and bentonite at some relics.Si,S,and Cl are concentrated at the corrosion front of the internal DPL,while Si and Al are concentrated at the external DPL.
其他文献
Effect of trace O element on the high-temperature wettability between Ni3Al scrap melt and Y2O3 ceramic at 1873 K is investigated.With the increase in O content in Ni3Al scrap melt from 6 to 21 ppm,the equilibrium contact angledecreases from 93.3° to 88.9
A Cr-Ni type of low transformation temperature (LTT) welding filler was devised in the present study.The LTT weld microstructures of the tungsten inert gas (TIG) and metal active gas (MAG) weldings were investigated by using electron-backscattered diffrac
Powder compacted and sintered Nb2O5 pellets were cathodically polarised against graphite anode in calcium chloride melt at 1173 K to study the influence of various factors on the electrochemical reduction of the oxide.The parameters were;duration and temp
The crystallization kinetics of Cu43Zr48Al9 and (Cu43Zr48Al9)98Y2 bulk metallic glasses in non-isothermal and isothermal conditions was studied by differential scanning calorimetry.In the non-isothermal and isothermal modes,the average activation energy o
Powder mixture of ball-milled aluminium and functionalized multi-walled carbon nanotubes was compacted via spark plasma sintering (SPS) to study effects of sintering temperature and heating rate.An increase in sintering temperature led to an increase in c
In this work,the electrochemical behaviors of SAM2X5 Fe-based amorphous alloy coating and hard chromium coating were comparatively studied in 3.5 wt％ NaC1 solution.In comparison with the hard chromium coating,the SAM2X5 coating exhibited a wider and stabl
The precipitation characteristics and mechanism of vanadium carbides during isothermal transformation at 650 ℃ in a V-microalloyed medium-carbon steel were investigated through scanning electron microscopy and transmission electron microscopy as well as d
Perovskite BaTiO3 (BTO) nanocrystals with a size of 150-200 nm have successfully been synthesized via a facile hydrothermal method by employing titanate nanowires as synthetic precursor.Tetragonality and spontaneous ferroelectric polarization of BTO nanoc
The σ-phase precipitation in 20％ cold-worked 15Cr-15Ni titanium-modified austenitic stainless steel was studied during long-term aging treatment.During the isothermal aging stage,the amount of σ-phase was significantly increased at beginning and gradually
It has been widely demonstrated that addition of Ni in low-carbon steels can effectively improve the cryogenic toughness,but the mechanism behind it has yet to be clarified.In the present work,the evolutions of microstructure and mechanical properties aft