论文部分内容阅读
本文就陶瓷行业自动压砖机模具使用Cr_(12)MoV材料的性能进行了简单介绍,并着重分析了制造模具的技术要求及工艺过程。
使用Cr12MoV制造陶瓷模具技术要求及工艺
【摘 要】
：
本文就陶瓷行业自动压砖机模具使用Cr_(12)MoV材料的性能进行了简单介绍,并着重分析了制造模具的技术要求及工艺过程。
【机 构】
：
广西贺县建筑瓷厂542800
【出 处】
：
中国陶瓷
【发表日期】
：
1993年2期
其他文献
在我国刑事诉讼中,控辩双方并没有实现真正的平等,庭外调查权可以说是对犯罪嫌疑人、被告人的有限的诉讼权利的补充和救济,有其存在的合理性.但庭外调查制度又有一定的缺陷,
Effects of rare earth element lanthanum on the microstructure of copper matrix diamond tool material
Effects of rare earth element La on the microstructure of Cu matrix diamond tools were researched under the conditions of various materials componentsand the pr
A numerical simulation analysis for reactions of chalcopyrite and pyrite particles coupled with momentum, heat and mass transfer between the particle and gas in
TEM observation of precipitation phase produced during tempering of steel AerMet100 and first princi
The microstructure evolution law and the structure of precipitates produced during the tempering of steel AerMet100 based on TEM observation and the calibration
Bipolar plates are a multifunctional component of PEMFC. Comparing with the machined graphite and stainless steels, the plain carbon steel is a very cheap comme
Some cobalt antimonides have been prepared and studied as the candidate anode materials for lithium ion batteries. Reversible capacities of 424, 423 and 546 mA@
A copper matrix composite reinforced by TiB<sub>2</sub> particle was fabricated by reactions of Cu,Ti and B powders.The microstructure and mechanical properties
气候变化对人类是一个巨大挑战，对运输行业也是如此。运输是排放二氧化碳最主要的来源之一，以欧洲为例，欧洲有23％的温室气体是在运输过程中排放出来的。但是运输行业跟其他行业不
<正> 就目前所知,一次称样全分析已应用的方法约有三种: 1.利用锂盐熔样,但熔后浸取速度慢,锂的引入将干扰钠、钾的测定; 2.采用原子吸收仪,但必须使用一氧化二氮,该物较贵,