【摘 要】
：
The change rules of displacement field characteristics of coal seam and tunnel\'s surrounding rock were obtained by means of numerical simulation-FLAC3D and site observation, and according to engineering geology and exploitation technology of 1151 (3)fu
【机 构】
：
Department of Resources Exploration and Management Engineering, Anhui University of Science and Tech
论文部分内容阅读
The change rules of displacement field characteristics of coal seam and tunnel\'s surrounding rock were obtained by means of numerical simulation-FLAC3D and site observation, and according to engineering geology and exploitation technology of 1151 (3)fully mechanized top coal caving (FMTC) face in Xieqiao colliery. The research\'s results show that the top coal displacement on the top of FMTC face is apparently larger than those of the middle and the bottom, the top coal begins to move in the front of the face\'s wall, and the sub-level top coal-rock moves ahead of the Iow-level top coal-rock, the verticai displacement of top coal-rock increases gradually as the decreasing of distance to face.Top coal and overlying strata in vertical direction are always in compressed state in the front of face, then the top coal begins to separate from the overlying strata at the upside of face. The support loading at face is mainly the deformation pressure due to top coal and main roof\'s movement, and it is not suitable for the FMTC face with traditional support design. Surrounding rock movement of the face is of near-field effect, the surrounding rock deformation is acute greatly near to the face, the ideas of supporting design for the tailentry and headentry should be changed from loading control to deformation control.
其他文献
Higher production, better safety standard, and potential for automation are some of the benefits of longwall mining. Today, longwall face advances at a faster rate exposing many diversified rock layers in a short period of time. It is now a serious challe
This paper presents a study on the criterion of crack initiation and propagation under creep conditions, which were investigated using specimens collected from outcropped sandstone rock formations. Beam specimens under three points bending were used in th
The target of the text is to scientifically appraise dynamic development of surface deformation in subsidence area and its influence on groundwork stability of natural pipe and then adopt some technological measures to ensure safe circulation of natural p
Being a safe and highly-efficient mining method, fully mechanized mining with sublevel caving (FMMSC) was extensively employed in Chinese coal mines with thick seam. In order to make drawing top-coal furthest to parallel work with shearer cutting coal,dec
Pit optimisation is the earliest and most established application of its kind in the minerals industry,but this has been primarily driven by metal,not coal.Coal has the same financiaI drivers for resource optimisation as does the metalliferous industry,ye
The paper was numerically focused on investigation of deformation, failure and instability of shear band-surrounding elastic rock system in plane strain direct shear test considering shear dilatancy according to fast lagrangian analysis of continua (FLAC)
The difficulty of selecting appropriate rheological model and parameters for the alternating distribution of soft and hard rock layers was often encountered due to the unhomogeneity, discontinuity and anisotropy of rock mass. The Burgers and generalized K
The sea level changes in the Paleozoic epicontinental basin were of high frequency and the transgressive events were episodic.This kind of sea level changes controlled both the basin filling and the coal accumulation within the basin.Coal accumulation in
The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datcng mine, and researched this innovations process, optimized the systemic design and working face outpla
The current practice of rock/coal outburst monitoring, prevention and control was reviewed. The uncertainty of major factors contributing to the occurrence of such hazards and the complexicity of mining conditions surrounding the occurrence were analyzed.