【摘 要】
：
The current practice of rock/coal outburst monitoring, prevention and control was reviewed. The uncertainty of major factors contributing to the occurrence of such hazards and the complexicity of mining conditions surrounding the occurrence were analyzed.
【机 构】
：
Mineral Resource Engineering, Dalhousie University, Halifax B3J1Z1;Key Laboratory of Mine Disaster P
论文部分内容阅读
The current practice of rock/coal outburst monitoring, prevention and control was reviewed. The uncertainty of major factors contributing to the occurrence of such hazards and the complexicity of mining conditions surrounding the occurrence were analyzed. A strategic concept for rock/coal outburst prevention was introduced. The objective is to identify the bursting potential in an area, rather than predicting the bursting, by introducing a multi- dimension index model: potential-of-bursting (POB), taking into consideration major contributing factors. In application, once the index has passed certain critical level indicating high risk, actions must be taken to reduce the bursting potential and to effectively prevent the hazard from occurring. A conceptual 2D model involving stress and methane pressure was described to demonstrate the methodology for determining the POB. However in practice, a POB model has to be established through experiments, field monitoring and calibration against case studies. To achieve this objective, coordinated research and international collaboration will be needed.
其他文献
The basic characteristics of the soft rock roadway under the dynamic pressure are analyzed. At the same time, the three fundamental approaches for controlling the surrounding rock are proposed, which are improving the surrounding rock strength, lowering t
Higher production, better safety standard, and potential for automation are some of the benefits of longwall mining. Today, longwall face advances at a faster rate exposing many diversified rock layers in a short period of time. It is now a serious challe
This paper presents a study on the criterion of crack initiation and propagation under creep conditions, which were investigated using specimens collected from outcropped sandstone rock formations. Beam specimens under three points bending were used in th
The target of the text is to scientifically appraise dynamic development of surface deformation in subsidence area and its influence on groundwork stability of natural pipe and then adopt some technological measures to ensure safe circulation of natural p
Being a safe and highly-efficient mining method, fully mechanized mining with sublevel caving (FMMSC) was extensively employed in Chinese coal mines with thick seam. In order to make drawing top-coal furthest to parallel work with shearer cutting coal,dec
Pit optimisation is the earliest and most established application of its kind in the minerals industry,but this has been primarily driven by metal,not coal.Coal has the same financiaI drivers for resource optimisation as does the metalliferous industry,ye
The paper was numerically focused on investigation of deformation, failure and instability of shear band-surrounding elastic rock system in plane strain direct shear test considering shear dilatancy according to fast lagrangian analysis of continua (FLAC)
The difficulty of selecting appropriate rheological model and parameters for the alternating distribution of soft and hard rock layers was often encountered due to the unhomogeneity, discontinuity and anisotropy of rock mass. The Burgers and generalized K
The sea level changes in the Paleozoic epicontinental basin were of high frequency and the transgressive events were episodic.This kind of sea level changes controlled both the basin filling and the coal accumulation within the basin.Coal accumulation in
The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datcng mine, and researched this innovations process, optimized the systemic design and working face outpla