【摘 要】
：
Particle removal mechanism was presented during machining particle SiC/Al composites with diamond grinding tool. The relevant removal modes and their mechanisms were discussed considering the impact and squeezing effect of diamond grit on the SiC particle
【机 构】
：
Henan Key Laboratory of Mechanical Equipment Intelligent Manufacturing, Zhengzhou University of Ligh
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Particle removal mechanism was presented during machining particle SiC/Al composites with diamond grinding tool. The relevant removal modes and their mechanisms were discussed considering the impact and squeezing effect of diamond grit on the SiC particle. The experimental results show that the aluminum matrix has larger plastic deformation, so the aluminum mixed with the surplus SiC particles is cut from the surface. The SiC particles can be removed in multiple ways, such as broken/fractured, micro cracks,shearing and pulled out, etc. More particles removed by shearing, and less particles removed by fractured during material removal progress can produce a better machined surface.
其他文献
The presents preparation and characterization of different types of lignocellulosic fillers (pine wood saw-dust/ walnut shell flour/ black rice husk powder) reinforced polypropylene composites were presented. The effect of MAPP as coupling agent (4wt％) on
Bi0.5Sb1.5Te3/Cu core/shell powders were prepared by electroless plating and hydrogen reduction, and then sintered into bulk by spark plasma sintering. After electroless plating, with increasing the Cu content, the electrical conductivity keeps enhancing
Dense Fe-Al-Cr coatings with approximately 50 μm in thickness are successfully prepared on the 1045 carbon steel substrates via a laser cladding process. Proper Cr content (5 at％ Cr) will lead to decrease in the melting point, and improves the viscosity o
BiOI nanosheets with high sorption capacity were successfully prepared by the simple hydrothermal method followed by calcination. The features of the as-obtained BiOI nanosheets were characterized by X-ray diffraction (XRD), Fourier transform infrared spe
The as-cast pure magnesium (Mg), with a purity of 99.99％, was hot-extruded at 300℃ to prepare a Mg bar with a diameter of 8 mm. The microstructure and mechanical properties of the sample before and after extrusion were investigated. The results show that
Through finite element numerical simulation and based on laminated plate theory, the effect of dimension on the torsion properties of uniform C/SiC composites pipe was studied to provide a theoretical guidance for preparing the C/SiC pipe with different d
The effect of strains on the thermal conductivity of Si/Ge superlattices was investigated by nonequilibrium molecular dynamics(NEMD)simulation.The thermal conductivities experienced a near linear drop with increasing tensile and compressive strains.It was
Bi2Te2.7Se0.3/Cu core/shell powders were prepared by electroless plating and hydrogen reduction,and then sintered into bulk by spark plasma sintering in order to improve the thermoelectric and mechanical properties of n-type Bi-Te thermoelectric material.
Photocatalytic reduction of CO2 was carried out on villiform spherical catalysts of Pd-TiO2 in isopropanol solution.The catalysts were synthesized by hydrothermal method,their structures,morphologies and optical absorption properties were characterized by
Manganese-doped Ba 0.925 Ca 0.075 TiO3 lead-free piezoelectric ceramics(abbreviated as BCT)with high mechanical quality factor were synthesized by conventional solid-state reaction method.The effects of excess Ba on the crystal structure,microstructure,an