论文部分内容阅读
这里介绍车斜端面用的夹具,它好比是一个活络的关节,由五部份零件组成:1是主体它有一个锥形尾柄;2是搭板,上面刻有角度刻线,并作有弧形长槽,以便对主体作适当的调整,再用螺栓和螺帽固紧成为一整全;3是可转动的关节,中间的一孔可穿入螺栓作为转动时的支点,尾部刻出一条准线,准线所对的刻度,就表示工件的端面对轴线所成的斜角,因此可以在一定的范围内车削斜端面;4是垫圈;5是嵌键;工件6靠一只螺帽固紧在这个夹具上。
Here is a description of the fixture for a beveled end of a car, which is like an articulated joint consisting of five parts: 1 a body with a tapered tail handle; 2 a strap with an engraved, angular line engraved with Arc-shaped slot, in order to make appropriate adjustments to the main body, and then bolt and nut tighten into a complete; 3 is a rotatable joint, the middle of a hole can be threaded into the bolt as the pivot point, the tail carved A guide line, the alignment of the scale, it means that the workpiece end of the axis of the bevel angle, it can be within a certain range of turning inclined end face; 4 is a washer; 5 is embedded key; 6 by a workpiece Nut fastened to this fixture.