论文部分内容阅读
这篇文章所介绍的双刀刨头是苏联技师达尼洛夫设计的,运用这种刨头能够使牛头刨床进行双程刨削。这种刨头的机构如下:撑架1焊在板2上。装在套筒3中的销子4是用来当作刀夹摇摆用的轴。在两个撑架间的这根销子上装有摆式刀夹5。插在刀夹孔6中的带槽刀杆7用来装置和紧固刨刀。两把刨刀的安装位置要彼此错开工作台进给量的一半。压紧螺钉8把刨刀Б压紧时又拉紧刨刀
The double-pole plow, introduced in this article, was designed by Danishov, a Soviet technician, to shave the shaper with a single planer. This plow the body as follows: Frame 1 welded to the board 2. The pin 4 housed in the sleeve 3 is a shaft for swinging the holder. A pendulum holder 5 is mounted on this pin between the two brackets. The slotted holder 7 inserted in the holder hole 6 is used to attach and fasten the planer. The two planers should be installed in a position offset by half of the table feed. Compression screws 8 planing knife Б compacting and planing knife