Solid electrolyte–electrode interface based on buffer therapy in solid-state lithium batteries

来源 :International Journal of Minerals, Metallurgy and Materials | 被引量 : 0次 | 上传用户:liudongjiw
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In the past few years, the all-solid lithium battery has attracted worldwide attentions, the ionic conductivity of some all-solid lithium-ion batteries has reached 10−3–10−2 S/cm, indicating that the transport of lithium ions in solid electrolytes is no longer a major problem. However, some interface issues become research hotspots. Examples of these interfacial issues include the electrochemical decomposition reaction at the electrode–electrolyte interface; the low effective contact area between the solid electrolyte and the electrode etc. In order to solve the issues, researchers have pursued many different approaches. The addition of a buffer layer between the electrode and the solid electrolyte has been at the center of this endeavor. In this review paper, we provide a systematic summarization of the problems on the electrode–solid electrolyte interface and detailed reflection on the latest works of buffer-based therapies, and the review will end with a personal perspective on the improvement of buffer-based therapies.
其他文献
针对国产200 MW火力发电机组低压缸零功率改造后,因采暖抽汽流量增加26.8%,导致原有加热器换热面积不足,在原位置加热器增容改造后又无法满足切缸调节蒸汽匹配的问题,对“低压缸零功率”配套的热网加热器进行换型增容改造,保证了低压缸零功率改造后供热输出最大,确保了热网系统的安全稳定运行,提高了机组的运行经济性.
An explosion-welded technology was induced to manufacture the GH3535/316H bimetallic plates to provide a more cost-effective structural material for ultrahigh temperature, molten salt thermal storage systems. The microstructure of the bonding interfaces w
Acid mine drainage presents an important threat to cementitious structures. This study is aimed at investigating the effect of cellulose nanocrystals (CNCs) on the acid resistance of cementitious composites. CNCs were added to mortar mixtures as additives
Silicon anodes are considered to have great prospects for use in batteries; however, many of their defects still need to be improved. The preparation of hybrid materials based on porous carbon is one of the effective ways to alleviate the adverse impact r
Composite electrodes prepared by cation exchange resins and activated carbon (AC) were used to adsorb V(Ⅳ) in capacitive deion-ization (CDI). The electrode made of middle resin size (D860/AC M) had the largest specific surface area and mesoporous content
In this work, sodium dicyanamide (SD) was used as a leaching reagent for gold recovery, and the effects of the SD dosage and solution pH on the gold-leaching performance were investigated. A gold recovery of 34.8% was obtained when SD was used as the sole
All-solid-state Li-ion batteries (ASSLIBs) have been widely studied to achieve Li-ion batteries (LIBs) with high safety and energy density. Recent reviews and experimental papers have focused on methods that improve the ionic conductivity, stabilize the e
The microstructural evolution and performance of diamond/Al composites during thermal cycling has rarely been investigated. In the present work, the thermal stability of diamond/Al composites during thermal cycling for up to 200 cycles was explored. Speci
Wood-based panels containing urea-formaldehyde resin result in the long-term release of formaldehyde and threaten human health. In this study, inorganic aluminosilicate coatings prepared by combining metakaolin, silica fume, NaOH, and H2O were applied to
Silicon (Si) is widely considered to be the most attractive candidate anode material for use in next-generation high-energy-density lithium (Li)-ion batteries (LIBs) because it has a high theoretical gravimetric Li storage capacity, relatively low lithiat