【摘 要】
：
In this work, sodium dicyanamide (SD) was used as a leaching reagent for gold recovery, and the effects of the SD dosage and solution pH on the gold-leaching performance were investigated. A gold recovery of 34.8% was obtained when SD was used as the sole
【机 构】
：
University of Science and Technology Beijing, School of Civil and Resource Engineering, Beijing 1000
【出 处】
：
International Journal of Minerals, Metallurgy and Materials
论文部分内容阅读
In this work, sodium dicyanamide (SD) was used as a leaching reagent for gold recovery, and the effects of the SD dosage and solution pH on the gold-leaching performance were investigated. A gold recovery of 34.8% was obtained when SD was used as the sole leaching reagent at a dosage of 15 kg/t. In the presence of a certain amount of potassium ferrocyanide (PF) in the SD solution, the gold recovery was found to increase from 34.8% to 57.08%. Using the quartz crystal microbalance with dissipation (QCM-D) technique, the leaching kinetics of SD with and without PF were studied. The QCM-D results indicate that the gold-leaching rate increased from 4.03 to 39.99 ng·cm–2·min–1 when the SD concentration was increased from 0 to 0.17 mol/L, and increased from 39.99 to 272.62 ng·cm–2·min–1 when 0.1 mol/L of PF was used in combination with SD. The pregnant solution in the leaching tests was characterized by X-ray photoelectron spectroscopy and electrospray mass spectrometry, which indicated that Au and (N(CN)2)– in the SD solution formed a series of metal complex ions, [AuNax(N(CN)2)x+2]– (x = 1, 2, 3, or 4).
其他文献
In this work, sodium dicyanamide (SD) was used as a leaching reagent for gold recovery, and the effects of the SD dosage and solu-tion pH on the gold-leaching performance were investigated. A gold recovery of 34.8％ was obtained when SD was used as the sol
The commercial development of lithium–sulfur batteries (Li–S) is severely limited by the shuttle effect of lithium polysulfides (LPSs) and the non-conductivity of sulfur. Herein, porous g-C3N4 nanotubes (PCNNTs) are synthesized via a self-template method
Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co
To improve the sulfur loading capacity of lithium-sulfur batteries (Li–S batteries) cathode and avoid the inevitable “shuttle effect”, hollow N doped carbon coated CoO/SnO2 (CoO/SnO2@NC) composite has been designed and prepared by a hydrothermal-calcinati
3Y-TZP/3wt％ Al2O3 powder was coated with varying amounts of BN using the urea and borate reaction sintering method, and then multiphase ceramics were prepared by hot pressing sintering. The micro-topography and the compositional analysis of synthesized ce
针对国产200 MW火力发电机组低压缸零功率改造后,因采暖抽汽流量增加26.8％,导致原有加热器换热面积不足,在原位置加热器增容改造后又无法满足切缸调节蒸汽匹配的问题,对“低压缸零功率”配套的热网加热器进行换型增容改造,保证了低压缸零功率改造后供热输出最大,确保了热网系统的安全稳定运行,提高了机组的运行经济性.
An explosion-welded technology was induced to manufacture the GH3535/316H bimetallic plates to provide a more cost-effective structural material for ultrahigh temperature, molten salt thermal storage systems. The microstructure of the bonding interfaces w
Acid mine drainage presents an important threat to cementitious structures. This study is aimed at investigating the effect of cellulose nanocrystals (CNCs) on the acid resistance of cementitious composites. CNCs were added to mortar mixtures as additives
Silicon anodes are considered to have great prospects for use in batteries; however, many of their defects still need to be improved. The preparation of hybrid materials based on porous carbon is one of the effective ways to alleviate the adverse impact r
Composite electrodes prepared by cation exchange resins and activated carbon (AC) were used to adsorb V(Ⅳ) in capacitive deion-ization (CDI). The electrode made of middle resin size (D860/AC M) had the largest specific surface area and mesoporous content