Plunger靶展平装置的设计与调试

• 作 者: 樊启文 吴晓光 潘波
• 出 处: 中国原子能科学研究院年报
• 发表日期: 2007年00期
• 关键词: 不锈钢管 拉紧 膜支架 薄膜 橡胶圈 支架 膜压 间距 平面 蒸发沉积

本文介绍了一种薄膜支架和展平技术,使用这种支架和展平技术易得到反冲距离寿命测量实验上要求的质量优良的平膜,即两平膜从几μm移至1μm间距时不会有接触。薄膜的拉紧状态通过锥形压板挤压“O”橡胶圈获得,薄膜在抛光的不锈钢管平面上被展平。

In this paper, a thin-film stent and flattening technique is introduced. Using this stent and flattening technique, it is easy to obtain a good quality flat film that is required for experimentally required recoil distance measurements. That is, when two flat films are moved from a few μm to a pitch of 1μm There will be contact. The tension of the film was obtained by pressing the “O” rubber ring with a tapered platen and the film was flattened on a polished stainless steel tube surface.