论文部分内容阅读
1.检查变速器油位前进行相关准备。(1)举升车辆,悬空前后车轮,启动发动机。(2)使用MD读取变速器油温,目标值在30~40℃范围内;当油温高于40℃,请等待油温下降到范围内再检查。(3)在选挡杆旁边,按下ESC功能关闭键。(4)挡位挂到R,保持5 s。(5)挡位挂到D,缓慢加速挡位升到4挡,在每个挡位保持5s。(6)挡位移到N,保持2000r/min的转速30s。(7)挡位移到P,发动机保持在怠速。2.四驱的车辆,检查螺丝孔,可
1. Check the transmission oil level before the relevant preparation. (1) Lift the vehicle, hang the front and rear wheels, and start the engine. (2) Use MD to read the transmission oil temperature, the target value is in the range of 30 ~ 40 ℃; when the oil temperature is higher than 40 ℃, please wait for the oil temperature to fall within the range and then check. (3) Next to the selector lever, press the ESC function off button. (4) gear to R, for 5 s. (5) gear to D, slowly accelerate the gear up to 4 gear, in each gear to maintain 5s. (6) shift to N, keep the speed of 2000r / min 30s. (7) shift to P, the engine remains idle. 2. Four-wheel drive vehicles, check the screw hole can be