Review on Application of Rare Earth Polishing Powders in Glass Polishing

来源 :稀土学报（英文版） | 被引量 : 0次 | 上传用户：yang97yang

【摘要】

：

The paper reviewed different explanations to the mechanism of glass polishing, the practices of glass polishing and the preparation of polishing powders, addres

【作者】

：

Li Xueshun YANG Guosheng

【机构】

：

Baotou Tianjiao Seimi Rare Earth Polishing Powder Co. Ltd.

【出处】

：

稀土学报（英文版）

【发表日期】

：

2004年期

【关键词】

：

glass polishing powder glass polishing rare earths

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

The paper reviewed different explanations to the mechanism of glass polishing, the practices of glass polishing and the preparation of polishing powders, addressed the growth mechanism of CeO2 crystals, summarized the roles of rare earth elements in glass polishing and the factors that may influence the polishing effects, and specified the existing problems in glass polishing.

其他文献

Magnetic Properties of Nd-Fe-B Sintered Magnet Powders Recovered by Yb Metal Vapor Sorption

Fine ground powders of Nd-Fe-B sintered magnet bulks(particle size=46～125 μm in diameter) were coated and alloyed with Yb metal by sorbing them. A significant r

期刊

metal materialsNd2Fe14B sintered magnetsmetal vapor sorptionmagnetic properti

Untraceable partially blind signature based on DLOG problem

This paper proposes a new untraceable Partially Blind Signature scheme which is a cross between the traditional signature scheme and the blind signature scheme.

期刊

Partially blind signatureDigital signatureBlind signature

Wear mechanism of heavy load friction contact pairs in tracked vehicle by combined ferrography and s

Ferrography is deemed as one of the most effective methods for wear particle analysis and failure diagnosis. By analyzing the configuration, content and composi

期刊

ferrographysurface analysiswearfailure analysislubricanting grease

Microstructure and Tensile Behavior of a Nano-Structured Al-Fe Based Alloy

Room temperature deformation behavior of A1-8Fe-2Mo-2V-1Zr alloy produced by spray forming and subsequent warm-extrusion at 693 K and/or rolling at 423 K was in

期刊

microstructuretensile deformationA1-Fe based alloyspray formingextrusionwar

Determination of Neutron Irradiation-Induced Phosphorus Segregation on Grain Boundaries in a P-doped

Irradiation-induced impurity segregation to grain boundaries is one of the important radiation effects on materials.For this reason, phosphorus segregation to p

期刊

Neutron irradiationSegregationGrain boundaryPhosphorus

关于建立公路养护预测、预报、预警体系的研究

根据公路养护管理现代化的要求,建立公路养护预测、预报、预警体系.同时,介绍公路监测,路面、桥梁病害处理和公路灾害处置方法.

期刊

公路养护预测预报预警公路病害灾害处置

Tensile Fracture Location Characterizations of Friction Stir Welded Joints of Different Aluminum All

The tensile fracture location characterizations of the friction stir welded joints of the AA1050-H24 and AA6061-T6Al alloys were evaluated in this study. The ex

期刊

Friction stir weldingFracture locationAluminum alloy

Physical and Electrochemical Properties of Doped LiFePO4 as Cathode Material for Lithium-Ion Batteri

LiFePO4 cathode material was synthesized by a solid-state reaction using doping several elements (Nb5 + ,Zr4 + ). The starting materials were mixed with a high-

期刊

Lithium-ion batteriesLiFePO4cathode materialdischarge capacity

Fabrication of Barrier Ribs for PDP by Capillary Infiltration Process and Their Sintering Behavior

Closed-cell type barrier ribs such as meander, honeycomb, SDR, and waffle types were produced using capillary molding process. Sintering of the ribs revealed th

期刊

PDPclose celled barrier ribssintering distortion

Wear-resistance and anti-scuffing of multi-arc ion plating molybdenum films

The multi-arc ion plating technology was employed to prepare the molybdenum films with thickness of 3 μm on the AISI 1045 steel. The wear and scuffing tests we

期刊

multi-arc ion platingmolybdenum filmwear and scuffing

Review on Application of Rare Earth Polishing Powders in Glass Polishing

其他学术论文