论文部分内容阅读
铣削斜面的工件最好是用转动铣头。由于工作台横向移动的距离比纵向移动的距离要小的多,所以加工较长的工件斜面就需要铣头能在工作台纵向所看到的平面内转动一个角度。然而有些铣头在这平面内不能转动。“机械工人”(冷加工)59年8期14页曾介绍一种万能转头,横向纵向都能转动。我们使用的转头也具有两个方向都能转动的特点,并且简便。附图是我们使用的万能转头的示意图。转头甲和转头乙
Milling the bevel workpiece is best to use rotary milling head. Because the table moves laterally a little less than the distance it moves longitudinally, machining a longer work-piece bevel requires the milling head to be turned an angle in the plane seen in the table’s longitudinal direction. However, some milling heads can not rotate in this plane. “Machinist” (Cold Working) 59, No 8, Page 14 We introduced a universal turret that can be rotated in both horizontal and vertical directions. The rotors we use also have the ability to rotate in both directions and are easy to use. The figure is a schematic of the universal rotor we used. Turn around and turn around B