论文部分内容阅读
我厂在加工如图1的花键轴时,由于工件太长,不能在已有的万能铣床上加工。为了解决这一困难,我们试验成功了在龙门刨床上加工花键轴的方法,现在把它介绍给大家。我们加工的是六键轴,为了保证六个键的等分,可以把铣床上用的分度头和尾架安装在龙门刨床的工作台上。工件装在分度头和尾架之间。首先采用普通平头宽刃切槽刀把工件刨成如图3所示的形状,然后再用带有凹弧形的刨
I plant processing spline shaft as shown in Figure 1, due to the workpiece is too long, can not be processed in the existing universal milling machine. In order to solve this problem, we successfully tested the method of machining a spline shaft on a planer and now introduce it to everyone. We are processing the six key shaft, in order to ensure the equalization of six keys, milling machines can be used on the indexing head and tailstock mounted planer table workbench. The workpiece is mounted between the indexing head and the tailstock. First of all, the use of ordinary flat-blade broadside grooving knife planing workpiece into the shape shown in Figure 3, and then with a concave arc shaper