论文部分内容阅读
文中介绍了锑化钢无接触磁敏电位器的主要电学参数（磁敏灵敏度、线性度和线性范围）及其测试方法，检测准确、可靠，特别是采用了TBLCURVE软件，很容易得到磁敏器件的校准曲线和拟合直线，从而可准确地得到磁敏器件的电学参数，并能准确计算出磁敏器件的线性度。磁敏电位器的环境条件试验对其可靠地应用是十分重要的，如低温（－40±3℃，1．5h）、高温（70±2℃，0．5h）试验，振动试验（功率谱密度为0．02g2／Hz，总均方根值5.2g振动频率为50～2000Hz，振动时间3min），低温工作试验（－5～－10℃），恒定湿热试验（4±3℃，湿度80％，时间48h），老化试验，室温零漂试验及低温零漂试验。所有参试磁敏电位器均通过了环境试验。
In this paper, the main electrical parameters (sensitivity, linearity and linearity) of the antimony steel contactless magnetostrictive potentiometer and its testing methods are introduced. The testing is accurate and reliable. Especially with the TBLCURVE software, it is easy to obtain the magneto-sensitive device Calibration curve and fitting line, which can accurately get the electrical parameters of the magneto-sensitive device, and can accurately calculate the linearity of the magneto-sensitive device. Magnetoelectric potentiometer environmental conditions for its reliable application of the test is very important, such as low temperature (-40 ± 3 ℃, 1.5h), high temperature (70 ± 2 ℃, 0.5h) test, vibration test (power spectrum Density of 0.02g2 / Hz, total root mean square value of 5.2g vibration frequency of 50 ~ 2000Hz, vibration time of 3min), low temperature test (-5 ~ -10 ℃), constant hot and humid test (4 ± 3 ℃, humidity 80 %, Time 48h), aging test, zero drift test at room temperature and zero temperature drift test. All tested magnetic potentiometers passed the environmental test.