论文部分内容阅读
Y9380齿轮倒角机,在齿端倒角过程中会出现齿形表面擦伤现象,现将擦伤原因和我厂解决此问题的方法简单介绍如下。一、齿面擦伤的原因该机床是一种间断分度机构的指形铣刀倒角机(包括AM6B倒角机)。在切削过程中,工件采用图示的装夹方法。工件3的定位由固定的齿形定位板1紧密卡紧,不得(扌晃)动,否则切削不会稳定,倒角齿面不光洁,还会降低刀具寿命。操作者为了克服这一现象,在调整工件与齿形定位板的啮合时,总是将胚具座5向倒角刀具2方向敲移,来消除工件啮合间隙和胚具装配间
Y9380 gear chamfering machine, tooth chamfer surface chamfering phenomenon will appear, the cause of the scrape and my factory to solve this problem is briefly described below. First, the cause of tooth surface abrasion The machine is a discontinuous index finger milling cutter chamfering machine (including AM6B chamfering machine). In the cutting process, the workpiece using the icon of the clamping method. The positioning of the workpiece 3 is tightly locked by the fixed toothed positioning plate 1, so that the cutting can not be stabilized, the chamfered tooth surface is not smooth, and the life of the tool will also be reduced. In order to overcome this phenomenon, the operator always adjusts the engagement between the workpiece and the tooth-shaped positioning plate to always move the blank holder 5 to the chamfering cutter 2 to eliminate the gap between the workpiece and the blank holder assembly room