论文部分内容阅读
太钢的高温作业具有冶金企业高温作业的特点， 高气温、低气湿， 强热辐射。１９９３ 年～１９９７ 年夏季共监测１ ０７１ 点次， 平均室内外温差５－０６ ℃， 工作地点气温３４－９ ℃， 辐射热６－３２Ｊ／ｃｍ２·ｍｉｎ ， 相对湿度４２－１ ％ 。同时１９９３ ～１９９７ 年防暑降温设施调查结果表明， 以降温效果好的空调、吊扇和电扇逐年增多， 而现场使用的轴流风机则逐年减少， 操作室内和远距离操作增多， 室外机旁操作减少， 高温作业环境明显改善， 与各项监测结果相对应。
TISCO operating high temperature metallurgical operations with high temperature characteristics, high temperature, low humidity, heat radiation. A total of 1 071 points were monitored during the summer of 1993-1997 with an average indoor-outdoor temperature difference of 5-06 ° C, a working place temperature of 34-9 ° C, a radiant heat of 6-32 J / cm 2 · min and a relative humidity of 42-1%. At the same time, the survey results of summer cooling facilities from 1993 to 1997 show that the air conditioners, ceiling fans and electric fans with good cooling effect have been increasing year by year. However, axial fans used in the field have been reduced year by year, operation indoors and at longer distances have been increased, operation beside outdoor units has been reduced, High-temperature operating environment improved significantly, with the monitoring results corresponding.