Effect of thermal exposure on the microstructure and creep properties of a fourth-generation Ni-base

来源 :材料科学技术(英文版) | 被引量 : 0次 | 上传用户:zhangxudan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The effect of thermal exposure on microstructure and creep properties of a fourth-generation nickelbased single crystal superalloy was investigated.The thermal exposure of samples after the full heat treatment was carried out at 1000 ℃,1100 ℃ and 1140 ℃ for 100 h and 200 h.The γ'coarsening,γ'rafting and γ channel widening were observed in samples after thermal exposure.When the thermal exposure time was constant,the morphology of γ'phase in the alloy evolved significantly with increasing aging temperature.The interfacial dislocation networks in aged samples after creep ruptured gradually became irregular and sparse with the increase of exposure temperature.When the higher exposure temperature was used,enlargement of the defect pores was observed in samples,the microcracks were more likely to initiate and propagate at the corner of these pores.After aging at 1000 ℃ for 100 h,the creep life at 1140 ℃/137 MPa was slightly longer than that of heat-treated sample,which could be attributed to the slightly coarsened γ'phase,homogenization of refractor elements.In contrast,the creep life of sample exposed at 1140 ℃ for 100 h was greatly decreased.The decrease of creep life was dominated by the rafting of γ'phase,the irregular interfacial dislocation networks as well as the enlargement of homogenization pores.
其他文献
Manganese phosphates have shown excellent performances and great potential in electrochemical energy storage,which are demonstrated by research works published
制备了全新的阻燃定型剂DHQEP/ET3228,利用传统RTM工艺,实现了对纤维增强环氧树脂复合材料的阻燃改性。该定型剂的加入为预成型体提供出色的定型效果,回弹角测试中仅发生了1.24°的回弹,同时还可以有效提升复合材料的阻燃性能(LOI可达36.8%)。另外,阻燃定型剂可以参与环氧树脂的固化反应,使得阻燃定型剂的添加对复合材料的界面性能影响较小,保持了复合材料良好的层间剪切性能。
1.IntroductionrnIn structural metallic materials, the occurrence of particular deformation mechanisms such as dislocation slip, deformation twins (DTs) [1,2] de
期刊
Mg-Gd-Y-Zr alloys with high strength fall within narrow composition range.The present paper explains their composition rule by establishing the cluster-plus-glu
The Ni43.75Mn37.5In12.5Co6.25 alloy was obtained by using the spark plasma sintering (SPS) technique.The martensitic transformation,magnetic and mechanical prop
The multi-principal-component concept of high-entropy alloys (HEAs) generates numerous new alloys.Among them,nanoscale precipitated HEAs have achieved superior
Components of Ti and Al dissimilar alloys were obtained by wire and arc additive manufacturing using two cold metal transfer (CMT) modes.Direct current CMT (DC-
Solid-state refrigeration based on the magneto-or mechano-caloric effect,including elasto-and barocaloric in ferroic phase transition materials is promising to
The concept of all-solid-state batteries provides an efficient solution towards highly safe and long-life energy storage,while the electrolyte-related challenge
The crevice corrosion behavior of Alloy 690 was investigated in high-temperature chloride solution containing different concentrations of thiosulfate (S2O32-) a