【摘 要】
：
Solid-state refrigeration based on the magneto-or mechano-caloric effect,including elasto-and barocaloric in ferroic phase transition materials is promising to
【机 构】
：
Jiangxi Key Laboratory for Rare Earth Magnetic Materials and Devices/Institute for Rare Earth Magnet
论文部分内容阅读
Solid-state refrigeration based on the magneto-or mechano-caloric effect,including elasto-and barocaloric in ferroic phase transition materials is promising to replace the current vapor compression refrigeration in consideration of environmental-friendliness and energy-saving.However,both high driven field and small thermal changes in all of these caloric materials hinder the development of solid-state refrigeration.Here we report a giant baro-caloric effect near room temperature induced by a low hydrostatic pressure in Co-based Co51Fe1V33Ga15 Heusler alloy.The maximum adiabatic temperature change under the applied pressure change of △p=0.1-100MPa can be as high as △TMaxad=7.7 K (△TMaxad / △preaches up to ～7.7 K kbar 1),surpassing the △TMaxad/△pvalue reported hitherto in baro-caloric alloys.In addition,the microstructure is also studied by using the electron microscopes.Along with the austenite and martensite,the submicron V-rich particles are precipitated in this alloy,which are believed to account for enhancing mechanical properties.
其他文献
In recent years,solar desalination and water evaporation/purification with various artificial architectures have drawn significant attention.Herein,we introduce
Tantalum (Ta) is used in orthopedic implants because it has excellent biocompatibility.However,high elastic modulus,bio-inertness,and unsatisfactory osteointegr
Manganese phosphates have shown excellent performances and great potential in electrochemical energy storage,which are demonstrated by research works published
制备了全新的阻燃定型剂DHQEP/ET3228,利用传统RTM工艺,实现了对纤维增强环氧树脂复合材料的阻燃改性。该定型剂的加入为预成型体提供出色的定型效果,回弹角测试中仅发生了1.24°的回弹,同时还可以有效提升复合材料的阻燃性能(LOI可达36.8%)。另外,阻燃定型剂可以参与环氧树脂的固化反应,使得阻燃定型剂的添加对复合材料的界面性能影响较小,保持了复合材料良好的层间剪切性能。
1.IntroductionrnIn structural metallic materials, the occurrence of particular deformation mechanisms such as dislocation slip, deformation twins (DTs) [1,2] de
Mg-Gd-Y-Zr alloys with high strength fall within narrow composition range.The present paper explains their composition rule by establishing the cluster-plus-glu
The Ni43.75Mn37.5In12.5Co6.25 alloy was obtained by using the spark plasma sintering (SPS) technique.The martensitic transformation,magnetic and mechanical prop
The multi-principal-component concept of high-entropy alloys (HEAs) generates numerous new alloys.Among them,nanoscale precipitated HEAs have achieved superior
Components of Ti and Al dissimilar alloys were obtained by wire and arc additive manufacturing using two cold metal transfer (CMT) modes.Direct current CMT (DC-