论文部分内容阅读
图例与读解公差带及说明ΦD轴线对2-ΦD1公共基准轴线A的垂直度公差为Φ0.05mm。ΦD轴线必须位于距离为公差值0.1mm,且垂直于2-ΦD1基准轴线A的两平行平面之内。ΦD轴线对基准轴线A的倾斜度公差为0.1mm。ΦD轴线必须位于距离为公差值0.1mm,且与基准轴线A成60°角的两平行平面之
Legend and Reading Tolerance Bands and Description ΦD Axis To 2-ΦD1 The common datum axis A has a tolerance of Φ0.05mm. The ΦD axis must lie within two parallel planes that are 0.1 mm apart and perpendicular to the 2-ΦD1 reference axis A. The inclination of the ΦD axis to the reference axis A is 0.1 mm. The ΦD axis must be located on two parallel planes at a distance of 0.1 mm from the tolerance and at an angle of 60 ° to the reference axis A