论文部分内容阅读
我们在使用微孔滤膜提高输液质量方面做些改进,现介绍如下: 一、管路的安装(见附图) 管路所用的管材可用不锈钢或无毒塑料。由配料桶下边出水口到药液泵进水口的管路中间,安一个止水阀,用于配料或接水时切断桶与泵之间通路。在由泵的出水口通过配料间与分装间之间的玻璃墙到滤器(1)这段管路中间,安一个回水管路通配料桶,并安一个止水阀可任意调节滤速。两个滤器串连并排平放在分装台下
We use the microporous membrane to improve the quality of infusion to make some improvements, are described below: First, the installation of the pipeline (see photo) The pipe can be used in pipe material available stainless steel or non-toxic plastic. The middle of the pipe from the water outlet below the ingredient bucket to the inlet of the liquid medicine pump is provided with a water stop valve for cutting off the passage between the water tank and the pump when dispensing or receiving water. In the pump from the outlet through the ingredients and between the partition between the glass wall to the filter (1) the middle of this pipeline, the security of a backwater pipe wild bucket, and a water valve to adjust the filtration rate. The two filters are placed side-by-side under the substation