Mechanisms of Rhenium on Wettability and Interactions Between Nickel-Base Superalloy Melt and Al2O3-

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:ly_exe
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A systematic study on the wettability and interactions between superalloy melts with various Re contents and Al2O3-based ceramic moulds was presented in this paper.It was found that the increase of Re content inhibited the interfacial reactions to some extent.With regard to the 0,1.5 and 3Re alloys,a double reaction layer containing Al2O3 and HfO2 was formed at the interface,but the thickness of reaction layer decreased with the increase of Re content.However,only Al2O3 phase was detected at the interface when the content of Re was 6 wt%,and the interface reaction was the weakest and the thickness of reaction layer was the thinnest.The wetting angle of the alloy/ceramic system increased as the level of Re increased.Moreover,the formation of viscous sand at the interface mainly depended on the change of wetting angle of the system.
其他文献
The corrosion behaviour of 316L and Alloy 625 was investigated using cyclic polarization,electrochemical impedance spectroscopy,X-ray photoelectron spectroscopy,Auger electron spectroscopy and induced coupled plasma-optical emission spectrometer.The resul
High-entropy alloys (HEAs) are a new class of materials with a potential engineering application,but how to obtain ultrafine or nano-sized crystal structures of HEAs has been a challenge.Here,we first presented an equiatomic CoCrFeNiCu HEA with excellent
A 444-type heat-resistant ferritic stainless steel containing 0.05 wt% Ce (rare earth element) and 2 wt% (Mo + W) was adopted as an experimental material to study the effect of finish rolling temperature on microstructure and texture evolution as well as
The kinetics of isothermal austenite (γ)-to-ferrite (α) transformation at various temperatures in Fe-2Mn and Fe-2Mn-0.5Mo (wt%) alloys is investigated via dilatometry experiments and phase-field modeling.It was interestingly found that Mo addition has a m
In order to improve the interface wettability as well as the interfacial bonding between graphene and copper matrix,in this work,graphene nanoplates modified with nickel nanoparticles (Ni-GNPs) were synthesized using a one-step method based on spray-dryin
Construction of suitable structural models in order to account for chemical short-range orders is the reason behind the difficult multi-scale computational simulation methods for solid solutions.Herein,using Ti-Mo alloys as representative,we used our clus
FeAlCuCrNiMo0.6Tix (x =0.2,0.6,0.8) high-entropy alloys were fabricated with flux-cored wire and surfaced on low-carbon steel by gas metal arc welding.The effect of Ti addition on the microstructures and properties of FeAlCuCrNiMo0.6Tix HEAs surfacing lay
Ti-Ta alloys have been widely studied for biomedical applications due to their high biocompatibility and corrosion resistance.In this work,nearly fully dense and in situ alloyed Ti-50 wt% Ta samples were fabricated by the laser powder bed fusion (LPBF) of
The effect of stacking fault energy (SFE) on the grain structure evolution of face-centered cubic metals during friction stir welding was investigated by using pure aluminum,pure copper and Cu-30Zn alloy as experiment materials.Tool “stop action” and rapi
The NiTi cladding with/without Ni interlayer was prepared on stainless steel (SS) by tungsten inert gas (TIG) surfacing process,aiming at achieving good cavitation erosion resistance.The ranking according to the cavitation erosion resistance is NiTi plate