论文部分内容阅读
实践证明,使用A5、A6、A0号工业纯铝箔不能保证其深拉制品满足技术条件。因此出现了用含有小于2％Fe的低合金化的Al-Fe-Si系合金代替工业纯铝的趋势。同时采用无锭轧制毛坯。本文的目的是研究铝带和
Practice has proved that the use of A5, A6, A0 industrial pure aluminum foil can not guarantee its deep-drawn products to meet the technical conditions. Thus there has been a tendency to replace commercial pure aluminum with low-alloyed Al-Fe-Si based alloys containing less than 2% Fe. At the same time the use of ingot rolling blank. The purpose of this article is to study aluminum ribbons and