论文部分内容阅读
我厂使用的S114辗轮式混砂机,常因刮板的磨损问题,而影响铸工车间的生产。近年来,我厂工人通过不断革新和试验,研制出一种结构简单、效果较好的刮砂板。这种刮板是利用原有的废旧内、外刮板(保持了合理的曲线型式),焊上钢丝绳即可。内刮板的底部每隔10毫米立焊一根长40～50毫米的废旧钢丝绳。外刮板的结构,在其底部焊钢丝绳外,并在外
The S114 rolling wheel sand mixer used by our factory often affects the production of the caster’s workshop due to the abrasion problem of the scraper. In recent years, I plant workers through continuous innovation and experimentation, developed a simple structure, better effect of the scraper. This scraper is the use of the original waste inside and outside the scraper (to maintain a reasonable curve), welded wire rope can be. At the bottom of the inner scraper, a waste steel wire rope 40 to 50 millimeters long was welded at intervals of 10 millimeters. Exterior scraper structure, at the bottom of the welded wire rope, and outside