论文部分内容阅读
我室研制的一种新型的管内防腐涂敷机具——管道内旋喷涂器,它是在吸取国外新技术的基础上自行研制的,适用于溶剂型涂料在各种管道内表面上进行涂装,以达到防腐、减小流体内摩阻、绝缘、隔热等不同要求,对油、气、水等长输管道的内壁涂装更为适宜,其涂装工艺简单,生产效率高;对涂料的适应范围广,对较高粘度和较高固体组份的重防腐涂料优越性更显著;涂层厚度均匀,附着力较好;涂料利用率高,环境污染少;一次涂膜厚度较大,在相同厚度要求下,可减少涂敷次数,缩短生产周期。通过
Our chamber developed a new type of in-tube anti-corrosion coating machine - Pipeline Sprayer, which is based on the absorption of new technologies developed on their own, suitable for solvent-based coatings in a variety of pipe coating on the surface , In order to achieve anti-corrosion, reduce the friction resistance, insulation, heat insulation and other different requirements of oil, gas, water and other long-distance pipeline wall coating is more appropriate, the coating process is simple, high production efficiency; Of the wide range of adaptation, the higher viscosity and higher solid content of the more significant advantages of heavy-duty coatings; coating thickness uniformity, better adhesion; paint utilization, less environmental pollution; a larger coating thickness, In the same thickness requirements, can reduce the number of coating, shorten the production cycle. by