论文部分内容阅读
由航空航天部成都新兴仪器厂承担的部级工艺研究课题“不锈钢着色技术研究”已于去年8月13日在成都通过了航空航天部部级鉴定.该厂研制的不锈钢着色技术,可以对表面光洁度达0.4以上的各种18-8奥氏体不锈钢(如:DCr18N:9,1Cr18N:9,1Cr18N:9T:,0Cr18N:9Ti等)实施色泽光亮、鲜艳、均匀地着色;光洁度在1.6以上的制品,则可采用与本工艺配套的前处理技术,获得理想的着色效果;彩色膜的色调以金色和蓝色系列为
The Department of Aeronautics and Astronautics Chengdu emerging instrument factory commitment to the ministry of technology research topic “stainless steel coloring technology research ” in Chengdu on August 13 last year passed the aerospace ministerial identification of the plant developed stainless steel coloring technology, you can On the surface finish of more than 0.4 of 18-8 austenitic stainless steel (such as: DCr18N: 9,1 Cr18N: 9,1 Cr18N: 9T :, 0Cr18N: 9Ti, etc.) to implement bright color, bright, uniform coloring; finish 1.6 The above products, you can use the pre-treatment technology and supporting the process to obtain the desired coloring effect; color film color to gold and blue series