论文部分内容阅读
为适应电脑软件和硬件发展的需要,鼠标器已成了必备的辅助软件设备,但是有的用户可能尚未安装它,一时又不知如何安装。下面就鼠标器的安装、设置与保养作一简单介绍。 一般,市场上的鼠标器按其接口分有三种:25孔方口、9孔方口和25孔圆口。在选择鼠标器时,选择方口为好,因为方口鼠标器是标准的RS232串行接口,多数计算机都能够用。安装时,只需从计算机的背面找到相对应的插口插入就可以。当然,鼠标器与其它外设一样,在使用之前须安装必要的驱动程序。安装鼠标器驱动程序的方法为:将装有驱动程序的软盘(一般驱动程序随鼠标器一起提供)插入驱动器中,接着键入驱动程序文件名(MOUSE)即可。
In order to meet the needs of the development of computer software and hardware, the mouse has become an indispensable auxiliary software device, but some users may not yet have it installed, and do not know how to install. The following mouse installation, setup and maintenance for a brief introduction. In general, the mouse on the market divided into three kinds according to their interface: 25 hole square mouth, 9 hole square mouth and 25 hole round. When selecting a mouse, it is better to select the square because the square mouse is a standard RS232 serial interface, and most computers can be used. Installation, simply find the corresponding socket from the back of the computer to insert it. Of course, the mouse and other peripherals, before use must install the necessary drivers. To install the mouse driver, insert the floppy disk with the driver (usually provided with the mouse) into the drive, and then type the driver file name (MOUSE).