Corrosion Inhibition of Galvanized Steel in NaCl Solution by Tolytriazole

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:einima
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Corrosion inhibition of tolytriazole for galvanized steel was studied in 5 mM NaCl by using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS),scanning vibrating electrode technique (SVET).The results of EIS and polarization tests indicate that tolytriazole is effective in corrosion inhibition of galvanized steel.As the concentration of tolytriazole is increased to 0.01 M,the inhibiting efficiency reaches above 98%.The low values of anodic and cathodic current density in SVET maps suggest that the complex of tolytriazole with galvanized steel inhibits the anodic and cathodic reactions of corrosion of zinc.The adsorption behaviour of tolytriazole is found to conform to Langmuir adsorption isotherm,which is typical chemical adsorption.
其他文献
The effect of sulphide (Na2S) concentration (SC) on the corrosion and cavitation erosion behaviours of a cast nickel aluminium bronze (NAB) in 3.5% NaC1 solution is investigated in this study.The results show that when the SC exceeds 50 ppm,the hydrogen e
Diffusion bonding of refractory Nb-Si-based alloy was performed with Ni/Al and Ti/Al nanolayers under the condition of 1473 K/30 MPa/60 min.The NbSS/Nb5Si3 in situ composite with the nominal composition of Nb-22Ti-16Si-3Cr-3Al-2Hf was used as the parent m
The hot deformation behavior of Fe-26Mn-6.2Al-0.05C steel was studied by experimental hot compression tests in the temperature range of 800-1050 ℃ and strain rate range of 0.01-30 s-1 on a Gleeble-3500 thermal simulation machine.The microstructural evolut
In this work,the corrosion behaviours of the amorphous Ni84.9Cr7.4Si4.2Fe3.5 alloy and its crystalline counterpart are studied in acidic,neutral,and alkaline solutions by scanning electron microscopy,electrochemical impedance spectroscopy,and potentiodyna
Anisotropic SmCo5/Co nanocomposite powders have been prepared by electroless Co deposition on commercial SmCo5 powders with hydrazine as reducer.The Co particles are mainly in the range of 8-27 nm and form dense/continuous soft magnetic coatings on the su
The effects of ausforming procedure and subsequent annealing treatments on microstructures of cobalt (Co) samples are investigated by electron channeling contrast and electron backscatter diffraction techniques.Results show that the ausformed Co samples c
Hybrid aluminum matrix composite powders reinforced with bimodal-sized Al2O3 particles were synthesized by mechanical milling.Two different approaches were investigated for the addition of submicron-and nano-sized Al2O3 particles to the aluminum powders.I
Hot compression tests were carried out with specimens of 20Cr-24Ni-6Mo super-austenitic stainless steel at strain rate from 0.01 to 10 s-1 in the temperature range from 950 to 1150 ℃,and flow behavior was analyzed.Microstructure analysis indicated that dy
In this work,surface characterization and electrochemical measurement were employed to investigate the effects of magnetic field (MF) on the corrosion of Q235 carbon steel in a NaCl solution containing sulphate-reducing bacteria (SRB) or extracellular pol
The hot deformation behavior of a medium-Mn steel was studied in terms of hot compression flow curves in the temperature range of 850-1050 ℃ and strain rates of 0.05-10 s-1.The thermo-mechanical analysis was carried out and suggested that the microstructu