论文部分内容阅读
差动型跳汰机,是一种作不对称曲线脉动的跳汰机,1965年研制成功的。主要用于处理多金属矿、重选厂堆存尾矿和砂金矿床中细粒不分级重物料。对目的矿物的有效分选粒度下限通常在+0.037毫米左右。一、整机型式差动型跳汰机结构有两种型式:大型固定式三室多列型和小型移动式双室单列型。(一)大型三室多列型如图1所示,两个或两个以上并列的箱体1,固定在机架2上,每个箱体横隔出三个筛室3,筛室有各自的侧动隔膜4,它由自带马达的传动箱5
Differential jig, is a jig for asymmetric curve pulsation, developed in 1965. Mainly used for processing polymetallic ore, re-election plant tailings and gold deposits in fine gold grading heavy material. The lower limit of the effective particle size of the mineral of interest is usually around +0.037 mm. First, the whole type differential jig structure there are two types: large fixed three-compartment multi-column type and small mobile dual chamber single type. (A) large three-room multi-column type shown in Figure 1, two or more parallel box 1, fixed to the rack 2, each box across the three sieve compartment 3, sieve compartment each Side diaphragm 4, which consists of gearbox 5 with motor