论文部分内容阅读
调节器配套机型型号FT81E 型型式长期额定工作制、防尘式、换向器式汽车直流发电机调节器配套发电机ZF(?)2D 型调节器工作时的电路1.电压调节器触点11闭合时:激磁电流由发电机正极经激磁绕组,磁场接线柱17、轭架,电压调节器触点11、电流限制器触点9、铁芯,平衡电阻8、电枢接线柱15,回到发电机负极。2.电压调节器触点11打开时:激磁电流由发电机正极经激磁绕组,磁场接线柱17,附加电阻12,加速电阻14、铁芯,平衡电阻8、电枢接线柱16,回到发电机负极。3.电流限制器触点9闭合时:激磁电路与电压调节器触点11闭合时的情况相同。4.电流限制触点9打开时:激磁电流由发电机正极经激磁绕组、磁场接线柱17,再分为二路。一路经电压调节器触点11,附加电阻13、电枢接线柱16,回到发电机负极;另一路经附加电阻12、加速电阻14、铁芯、平衡电阻8、电枢接线柱16,回到发电机负极。
Regulator Models Model FT81E type long-term rated working system, dust-proof, commutator DC generator regulator supporting generator ZF (?) 2D regulator circuit at work 1. Voltage regulator contacts 11 closed: the excitation current from the generator positive through the excitation winding, the magnetic field terminal 17, the yoke, the voltage regulator contact 11, the current limiter contact 9, the core, the balance resistor 8, the armature terminal 15, back To the generator negative. 2. When the voltage regulator contact 11 is open: the excitation current is generated by the positive pole of the generator via the excitation winding, the magnetic field terminal 17, the additional resistor 12, the accelerating resistor 14, the iron core, the balance resistor 8, the armature terminal 16, and back to the power generation Machine negative. 3. Current limiter contact 9 is closed: The excitation circuit is the same as when the voltage regulator contact 11 is closed. 4. current limit contact 9 is open: the excitation current from the positive generator excitation winding, magnetic field terminal 17, is divided into two. All the way through the voltage regulator contact 11, additional resistor 13, armature terminal 16, back to the negative generator; the other way through the additional resistor 12, the acceleration resistor 14, the core, the balance resistor 8, armature terminal 16, back To the generator negative.