厂拌热再生技术在S239省道中的应用研究

来源 :公路交通科技(应用技术版) | 被引量 : 0次 | 上传用户:qq1036191963
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
厂拌热再生技术是将回收的沥青路面材料与新的沥青、集料材料(有时还包括再生剂)混合,在拌和厂集中生产再生热拌沥青混合料的过程。通过研究掺加不同掺量再生料对沥青混合料性能的影响,结合工程特点、碾压工艺确定最优沥青混合料性能时的最佳再生料掺量。 Hot mix plant technology is recycled asphalt pavement materials and new bitumen, aggregate materials (sometimes including renewable agent) mixed in the mixing plant to produce hot recycled asphalt mixture process. Through studying the influence of adding different amount of recycled material on the performance of asphalt mixture, combining with the engineering characteristics and rolling process, the optimum content of recycled material in determining the optimal performance of asphalt mixture was determined.
其他文献
2001年美国安然和世界通讯公司财务欺诈丑闻引起了人们对于现行会计准则的广泛质疑,会计准则的制定思路由规则导向转变为原则导向,原则导向下的IFRS准则包括了大量的估计、判
Electron microscopic investigation on low carbon steel strips produced by the CSP process has been carried out. Large number of oxide dispersive precipitates ha
By use of ICP spectroscopy, energy spectrum analysis, hydrogen tester, image analyzer, the differential scanning calorimetric(DSC) and microscope analysis, the
AZ91 alloys were prepared by hot extrusion and its microstructure and tensile behavior at room temperature were investigated. Compared to as-cast ingot, the gra
为了保证加工孔的精度,一般常采用钻孔——扩孔——铰孔工艺。但是遇上特殊规格的孔径工件,往往手头缺乏铰孔工具,这时可采用如图所示的扩孔方法,在被扩的孔口上,垫上一块比
天津市自来水集团有限公司作为国有大型企业,固定资产和在建工程的核算管理在集团财务管理中占有重要地位,对企业起着重要的影响作用。因此,对于固定资产和在建工程的管理,尽
1. INTRODUCTIONTheturbulentcoherentstructurewasfoundandresearchedintherecentthreedecadesandprovidedastrongimpetusforfurtherstu... 1. INTRODUCTIONTheturbulentcoherentstructurewasfoundandresearchedintherecentthdecadesandprovidedastrongimpetusforfurtherstu
期刊
1. INTRODUCTIONItwasobservedinmodeltestsandprototypeexperimentsthattensionlegplatforms(TLP′s)andgravitybasedstructures(GBS)exper... 1. INTRODUCTIONItwasobservedinmodeltestsandprototypeexperimentsthattensionlegplatforms (TLP’s) and gravitybasedstructures
期刊
聊城市位于鲁西平原,泵站的扬程普遍较低(一般在1.5~4m),水泵多为轴流泵,且以28ZLB—7O型为主。泵站的模式和存在的问题大体相同。通过对一些站试点测试,全市现有泵站的平均
在丘陵地区,无论是交通上的公路桥还是水利工程中的渡槽,在进行棋图纵向布置时,为节省边墩基础开挖量,往往会出现如下两种情况:一是靠近边跨的支域,承受左右拱圈传来的轴向推力,其作