Nano-treatment of Autoclaved Aerated Concrete Waste and Its Usage in Cleaner Building Materials

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:mfklyga
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Autoclaved aerated concrete waste (AACW) was used as a raw material to prepare nucleation seed for acceleration of Portland cement. Nano AACW seed with median particle size of 324 nm was prepared by wet grinding method. Both the electrical conductivity and pH value of nano AACW suspension were obviously improved. Both the setting times and intensity of the main hydration heat peak were promoted by nano AACW, indicating the possibility of AACW suspension as nucleation seed. The early age compressive strength before 3 days was also clearly improved by nano AACW, with no negative effect on the late age strength. Furthermore, the reduced CH content with dosage of nano AACW indicates that nano AACW not only plays a role of nucleation seed in cement hydration, but also has a certain pozzolanic reaction.
其他文献
Si/Cu3Si@C composites encapsulated in CNTs network (SCC-CNTs) were synthesized via the combination of ball-milling and CVD methods. SCC-CNTs consist of conductive Cu3Si, amorphous carbon layer, cross-linked CNTs, and the etched pores, which can play the s
A simple route to synthesize the polyaniline (PANI) nanofibers with diameter about 150 nm was reported.In this strategy,the PANI nanofibers were fabricated by electrochemical deposition by using two-electrode configuration in 0.01 M aniline and 0.01 M H2S
A series of solar radiation tests for the polytetrafluoroethylene(PTFE) bulk and film samples were carried out using Q-SUN XE-3-HSC type Solar Radiation Simulator,with the test parameters as follows:radiation intensity is 1 120 W/m2,temperature is 55 ℃ an
A series of poly (ethylene oxide) (PEO) membranes with star-like structures for CO2/H2 separation were prepared by the photo-polymerization method.The structure of PEO membrane was characterized by Fourier transform infrared spectroscopy (FTIR).The therma
Nanocrystalline and amorphous LaMg12-type LaMg11Ni+xwt% Ni (x = 100, 200) alloys were synthesized by mechanical milling. Effects of Ni content and milling time on the gaseous and electrochemical hydrogen storage kinetics of as-milled alloys were investiga
Nitrogen doped multi-channel graphite was successfully prepared by using nitrogen doping and KOH etching technologies. The three-electrode and EIS tests indicates that the etched graphite possesses lower electrochemical resistance than the pristine graphi
The viability of using polypropylene fibers (PPF) in concrete was largely studied. Yet, few of the existing research studies investigated the effects of PPF on the properties of concrete containing recycled concrete aggregate (RCA). Mixes with different R
The Be films were prepared by thermal evaporation at different sources to substrate distances (SSD) on glass substrates. The decrease of SSD from 90 mm to 50 mm caused the increase of substrate temperature and the rising density of incident Be atoms, thus
The results of the study of raw mix preparation and foam glass-ceramics production using diatomite as a raw material were presented in the following article. A mixture of diatomite and 40% NaOH solution was subjected to heating at a constant temperature o