论文部分内容阅读
Rock burst is one of the most catastrophic dynamic hazards in coal mining. A static and dynamic stresses superposition-based (SDSS-based) risk evaluation method of rock burst was proposed to pre-evaluate rock burst risk. Theoretical basis of this method is the stress criterion incurring rock burst and rock burst risk is evaluated according to the closeness degree of the total stress (due to the superposition of static stress in the coal and dynamic stress induced by tremors) with the critical stress. In addition, risk evaluation criterion of rock burst was established by defining the “Satisfaction Degree” of static stress. Furthermore, the method was used to pre-evaluate rock burst risk degree and prejudge endangered area of an insular longwall face in Nanshan Coal Mine in China. Results show that rock burst risk is moderate at advance extent of 97 m, strong at advance extent of 97?131 m, and extremely strong (i.e. inevitable to occur) when advance extent exceeds 131 m (mining is prohibited in this case). The section of two gateways whose floor abuts 15?3 coal seam is a susceptible area prone to rock burst. Evaluation results were further compared with rock bursts and tremors detected by microseismic monitoring. Comparison results indicate that evaluation results are consistent with microseismic monitoring, which proves the method’s feasibility.