论文部分内容阅读
There are significant effects of process parameters on internal qualities of bloom,and these process parameters are as follows:position and reduction amount,reduction distribution,reduction rate,and so on.Developing a control model is the key to apply soft reduction technology successfully.As the research object,360 mm×450 mm bloom caster in PISCO (Panzhihua Iron and Steel Co.) has been studied,and the research method for control model of dynamic soft reduction has been proposed.On the basis of solidification and heat transfer model,the position of soft reduction and reduction distribution of each frame are determined according to the bloom temperature distribution and solid fraction in bloom center calculated.Production practice shows that the ratio of center porosity which is less than or equal to 1.0,increased to 97.27%,ratio of central segregation which is less than or equal to 0.5,increased to 80.91%,and ratio of central carbon segregation index which is more than or equal to 1.10,decreased to 4% with the applying model of dynamic soft reduction.
There are significant effects of process parameters on internal qualities of bloom, and these process parameters are as follows: position and reduction amount, reduction distribution, reduction rate, and so on. Development a control model is the key to apply soft reduction technology successfully. As the research object, 360 mm × 450 mm bloom caster in PISCO (Panzhihua Iron and Steel Co.) has been studied, and the research method for control model of dynamic soft reduction has been proposed. On the basis of solidification and heat transfer model , the position of soft reduction and reduction distribution of each frame are determined according to the bloom temperature distribution and solid fraction in bloom center calculated. Production practice shows that the ratio of center porosity which is less than or equal to 1.0, increased to 97.27% , ratio of central segregation which is less than or equal to 0.5, increased to 80.91%, and ratio of central carbon segregation index which is more than or equal to 1.1 0, decreased to 4% with the applied model of dynamic soft reduction.