论文部分内容阅读
When producing high surface quality galvanizing steel coils for automobile use,there are always many light spots on the surface since Hansteel CGL No.1 has been put into operation.The defect samples were analyzed by SEM and EDS.The result shows that cause for light spot is not only one.There are more Mn and P in high strength auto sheet,which can result in difficulty to be cleaned off the oxide on the hot rolled coils,so the defects coming.This is why the defects come with high strength auto sheet.When coils galvanized,the defects cant be covered up.To the contrary,the defects will be more obvious when zinc growing on the surface.And sometimes zinc or residue can adhere to work rolls when strips passing through SPM.The deposits then press normal coating.So the light spots come more.When the defect comes from pressing,there is no defect on steel base.The causation is found and measures were taken including high pressure cleaning equipments adopted.Result shows that the defects disappeared.