• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. Passivation at Nanoscale-the cases of Copper,Nickel and 316 Stainless Steel

Passivation at Nanoscale-the cases of Copper,Nickel and 316 Stainless Steel

来源 :国际腐蚀工程大会(ICEC2016) | 被引量 : 0次 | 上传用户：joinnow06
【摘 要】
：
Passivation,a typical electrochemical behavior,involves the formation of a thin layer on the surface of a bulky metal component,which has been assumed to be native,dense,and highly protective to the m
【作 者】
：
Bowei Zhang Shiji Hao Junsheng Wu Xiaogang Li Yizhong Huang 
【机 构】
：
School of Materials Science and Engineering,Nanyang Technological University,Singapore
【出 处】
：
国际腐蚀工程大会(ICEC2016)
【发表日期】
：
2016年10期
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
　　Passivation,a typical electrochemical behavior,involves the formation of a thin layer on the surface of a bulky metal component,which has been assumed to be native,dense,and highly protective to the metal from deterioration.
其他文献
Galvanic corrosion model for cathodic protection of 316L steel using MAO coated aluminum anode
In order to avoid the overprotection and the anode aluminum waste in the cathodic protection of 316L steel in subsea water,a Micro-arc Oxidation(MAO)coating was prepared on the surface of the aluminum
会议
The progress of study for grounding technology in power system
The power plant and substation(including the converter station et al)grounding grid is an important part of substation equipment which can not only maintain safe and reliable operation of the power sy
会议
Effect of hydrogen on the passive film of Alloy600 in simulated PWR primary water
In a typical Devanathan-Stachurski device with a simulated PWR primary water(1200ppm H3BO3+500ppm Na2SO4+2ppm LiOH,60℃),the working surface of the Alloy600 test sample in the oxidation cell was in a s
会议
The review of grounding grid defect diagnosis
Grounding grid provides areas for electrical equipment in the substation.When the system has a fault it can play a fast discharge fault current,improve grounding grid metal conductor and plant surface
会议
Effect of Surface Enhancement on Corrosion Performance of Metals
The main objective of this paper is to review the effects of surface enhanced layer by shot peening,laser peening,low plasticity burnishing etc.on stress corrosion,corrosion fatigue and other corrosio
会议
Corrosion Resistance on Iron Group Based Amorphous Alloys:Homogeneity and Superhydrophobicity Beyond
Corrosion is the results of the inherent micro/macro electrochemical inhomogeneity in metals or alloys subjected to outside environmental attacks.Homogenization and seclusion,therefore,are the fundame
会议
External Corrosion Direct Assessment for Stray Current Interfered Pipeline-A Case Study
External corrosion direct assessment(ECDA),which includes four step processes of pre-assessment,indirect assessment,direct assessment and post assessment,is an important method for evaluating pipeline
会议
The applicability of different electrochemical testing technologys in the study of microbial corrosi
Microbial corrosion is one of the typical marine corrosion phenomena caused by microbial activity.The corrosion process is electrochemical process.Many electrochemical testing technologys need to exer
会议
Corrosion Inhibition Performance and Mechanism of Cefotaxime Sodium on Q235 carbon steel and AA2024-
The corrosion inhibition performances of cefotaxime sodium(CEF)on Q235 carbon steel and 2024-T3 aluminum alloy(AA2024-T3)in 0.1 mol·L-1~1.0 mol·L-1 HCl solutions were studied by weight loss measuremen
会议
A unique Hf-modified(Ni,Pt)Al coating with enhanced resistance against high temperature oxidation an
For advanced gas-turbine engines,the inlet combustion temperature has been increased drastically to meet the strategy of enhancing power-out efficiency.The hot-sectional components,which suffer aggres
会议