【摘 要】
：
The constructions and operations of charging infrastructures have great influence on the development of new energy vehicles.In recent years,the Chinese charging infrastructure has made some achievemen
【机 构】
：
Tsinghua Automotive Strategy Research Institute,State Key Laboratory of Automotive Safety and Energy
论文部分内容阅读
The constructions and operations of charging infrastructures have great influence on the development of new energy vehicles.In recent years,the Chinese charging infrastructure has made some achievement,while the business model of it is still lacking.This paper analyses the current situation of NEVs in China and make judgements on the future development trend of NEVs and travel mode.Then under the context the overall market,the industry chain of charging infrastructure and its existing problems are analyzed,which is useful to predict the development trend of charging infrastructures from market and operation systematically.Moreover,combined with the actual development environment,recommendations on the business model of charging infrastructure construction are proposed.
其他文献
Taking the optimization method of aluminum alloy frame structure as the research object,a successive approximation topology optimization method was proposed.According to the benchmark electric vehicle
本文建立了某轿车白车身隐式全参数化模型，计算分析了其自由状态下低阶固有振动特性、白车身的扭转和弯曲刚度及部分碰撞性能，通过与试验数据对比验证了参数化模型的可信度.通过灵敏度分析及贡献度分析方法，确定出白车身轻量化设计变量.通过白车身非主要安全件和主要安全件两部分轻量化优化设计，最终得到了该白车身轻量化设计结果.轻量化后白车身的质量降低5.80＃，减重效果比较明显，同时白车身各性能指标变化不大，证实
Effect of annealing process on the microstructure and mechanical properties of 780MPa complex phase(CP780)steel was studied.The results show that the microstructure of experimental steel contains ferr
车身内表跟踪喷涂机器人及其输送链组成的系统，在安装和施工过程中，不可避免地存在安装误差，为实现离线编程和不同机器人的程序互拷，需要对机器人基座进行标定。本文描述了轨道机器人的跟踪运动学模型，建立跟踪坐标系误差模型。将某台机器人定义为主机器人，通过跟踪示教车身特征点，辨识其他机器人跟踪坐标系参数，使从机器人精度接近主机器人，实现不同机器人的程序互拷。
车身内表喷涂站的开门机在打开车门过程中，开门机与车门的运动轨迹不同步而引发一些故障报警。根据车体铰链的两个中心坐标，获得铰链轴线方程，构建铰链坐标系。通过齐次变换，将平面圆轨迹转换到开门机空间坐标系下，得到开门机的精确运动轨迹。获得的开门机轨迹分布在以铰链为轴线的空间圆弧上，开门机轨迹与车门运动同步，消除了两者的运动偏差。
辊床是涂装车间普遍使用的一种车身输送形式，广泛应用于涂装车间各工艺线的地面输送。本文通过校核辊床的侧板强度、螺栓强度、轴承寿命及电动机选型，分析由新车型并入带来的载荷增加的影响，对其他涂装车间也有很大的参考价值。
汽车制造行业在国内发展日渐成熟，国产输送设备也趋于稳定，涂装车间的设备制造及安装也已积累越来越多的经验。本文以某公司新建涂装车间为例，对输送设备的创新改进进行总结与分享。
The cooling system is an important subsystem of the engine,and its performance directly plays a key role in engine performance.In this paper,the vehicle cooling system model is built up with AMESim,wh
In the process of electric vehicle operation,the heat generated by the battery charge and discharge will cause the temperature of the battery to rise,and the temperature will affect the performance,se
本文基于聚类分析结果，使用比功率分布方法构建出西安市2路公交线路拥堵、比较通畅、通畅三类工况和综合行驶工况，分析了三类工况与各自类数据集合的误差以及综合工况与总数据和校验数据的误差。结果表明：基于比功率分布构建的工况能反映西安市公交线路实际道路行驶情况并为准确预测公交排放奠定基础。