Design optimization of microstructures for optimal dampingcharacteristics of viscoelastic composites

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：coding_key

【摘要】

：

　　The viscoelastic materials is often utilized for wide applications such as vibration reduction devices.This paper present a topology optimization method to

【作者】

：

WenjiongCHEN;ShutianLIU;

【机构】

：

State Key Laboratory of Structural Analysis for Industrial Equipment,DalianUniversity of Technology,

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　The viscoelastic materials is often utilized for wide applications such as vibration reduction devices.This paper present a topology optimization method to design microstructures for optimal damping characteristics of viscoelastic composites.An inverse homogenization problem for two-phase viscoelastic composites is formulated as a topology optimization problem.

其他文献

复合材料单剪螺栓连接的次弯曲效应研究

　　螺栓连接作为一种典型连接方式，在飞机复合材料结构中应用广泛。根据搭接方式不同，螺栓连接可以分为单剪和双剪连接两类。单剪连接的偏心加载特点导致显著的次弯曲效应：加载

会议

复合材料结构螺栓连接弯曲效应严重变形双剪连接连接方式加载搭接方式

复合材料螺栓连接结构多尺度优化设计研究

　　先进复合材料由于其良好的力学性能而被广泛应用于航空航天领域。在复合材料结构设计中，螺栓连接是连接结构的主要应用形式。但螺栓连接部分也是复合材料整体结构中相对薄

会议

复合材料螺栓连接结构多尺度优化力学性能航空航天领域整体结构优化设计应用形式

Optimization of shape and reinforcement of oval cut-out infiber-reinforced composite laminates under

　　Optimum designs of the shape and reinforcement of cut-outs in composite structures are of great significance in aeronautical engineering.In previous work [1

会议

Structural Design and Optimization of an All-CompositeWing for UAV Platform

　　In order to obtain an all-composite wing with the highest value of P/W (the ratio of load to mass), a numerical approach was presented to predict the ultima

会议

Structure Design for CFRP Tensile Loading under Big BendingCurvature

　　Carbon fiber reinforced polymer composite (CFRP) has high strength and low density,and is already widely used in many fields as load-bearing structure.Howev

会议

Analysis of hail impact damage on composite laminates using Smoothed Particle Hydrodynamics (SPH) me

　　Because of the weakness of composite laminates in the out-of-plane direction, the localized hail impact on composite structures can result into the very dan

会议

Circumferential penetration delamination defectsimpact on the carrying capacity of the laminatedcyli

　　Delamination defects was one of the common and serious defects in the laminated cylindrical shell.For the laminated shell with delamination, even the presen

会议

Heat Cloak Design Using Fiber Reinforced Composite

　　Although the spatial variation of the material conductivity required for achieving thermal invisibility in the structure (heat cloak) can be obtained throug

会议

Design and optimization of the composites tube of

　　The composites tube designed as the core of the hollow underframe was analyzed by finite element method in the current work.Four different section types of

会议

Comparative Study on Fatigue Assessment Methods betweenS-N Curve and Fracture Mechanics

　　A comparative study on two fatigue assessment methods has been performed in this paper.The analysis theory and method were discussed first and a comparison

会议

Design optimization of microstructures for optimal dampingcharacteristics of viscoelastic composites

其他学术论文