宽带卫星通信系统中OFDM调制器设计

来源 :第十二届卫星通信学术年会 | 被引量 : 0次 | 上传用户:mingtian2060
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
在移动通信中,随着数据传输速率的提高,对频谱资源的要求会越高。对于卫星移动通信系统,要求其向宽带化的方向发展,产生的问题是其信道相干带宽不再远大于信号带宽,会带来频率选择性多径衰落,同时会面临严重的码间串扰ISI,传统的单载波调制方式已不能解决这些问题。 OFDM技术作为一种抗频率选择性衰落性和ISI的高速数据传输方式日益受到重视,并尝试引入到宽带卫星移动通信系统,如数字视频广播一卫星手持终端服务(Digital V deoBroadcasting-Satellite services to Handhelds,DVB-SH)标准将OFDM技术应用于卫星移动通信。本文针对OFDM调制实现中峰均比抑制、频谱带外泄漏抑制、多采样率信号实现等问题,通过分析不同滚降参数a下时域带外泄漏抑制技术的性能以及不同窗函数对多采样率信号处理技术的影响,设计并实现了用于宽带卫星通信系统的OFDM调制器。首先,设计了一种基于迭代限幅滤波的峰均比抑制方法.然后,分析了采用不同升余弦滚降参数的时域加窗带外泄漏抑制方法.最后,分析基于NCO的多采样率信号处理技术在不同窗函数下对OFDM信号频谱的影响.实现OFDM调制器并通过测试表明,该方案实现的OFDM调制器信号的带外泄漏抑制达50dB.
其他文献
In making sintered steel components,lubricant plays one of the most critical roles as it determines apparent density,flow rate,fillability,achievable green density,green strength and surface cleanness
This study prepared Mo sputtering targets with different microstructures and textures through using several metallurgical processes.The effects of microstructure and texture on the sputtering properti
The Al-Cr-N hard film for tribological application is commonly prepared by sputtering from AlCr alloy target in Ar+N2 mix gas atmosphere.The general method to manufacture Al-rich Al-Cr-N film is co-sp
The origin and development process of world cemented carbide industry,especially in China,is reviewed.China cemented carbide enterprises have been insisting on making independent innovations to lead t
Powder metallurgy method was used to prepare copper alloy nanocomposites (CuCrZr/AlN) with high strength and conductivity.The morphologies and structures of the CuCrZr/AlN nanocomposites were analyzed
Metal injection molding (MIM) for HK30 heat resistant stainless steel has been investigated,including the process steps of feedstock preparation,injection molding,debinding and sintering.Mechanical pr
Sinter hardening of PM components is well known as a cost-effective and feasible alternative to secondary heat treatment.Lots of application progress has been made in recent years.Nickel and molybdenu
近些年来,随着移动通信技术的不断发展以及高速铁路的在全球的全面普及,人们对于高铁移动通信的提出了更高的要求,传统的高铁移动通信已经不能满足当前的通信需求。目前解决高铁移动通信的方案归纳为两大类:一是在列车经过的沿线铺设大量的通信基站、直放站或者是通信电缆等,利用类似于蜂窝覆盖的方式实现高铁移动通信;二是利用卫星通信的大面积覆盖实现高铁移动通信。这两种方案各有优缺点,本文提出的将平流层通信应用到高铁
随着现代战争的发展,高速武器平台(如超音速战斗机等)的使用日趋广泛,如何提高高速武器平台通信的有效性和可靠性是一重要的研究课题.由于移动卫星通信系统(MSS)具有覆盖广、传输时效高和系统容量大等特点,面向高速武器平台的移动卫星通信系统得到了大量的关注,具有重要的研究价值.当前,制约高动态武器平台通信能力的问题在于大多普勒频移以及多阶频率变化率,本文首先对基于MSS的高动态信道进行了数学建模,其次分
传统天线伺服系统的分析方法是在天线座、传动机构、天馈线、高频箱安装完毕后,通过测量系统的谐振频率,来建立系统的数学模型,并根据伺服系统的战技指标,确定系统的期望特性,从而求得校正参数。这种方法调试时间长,并且调试过程中要进行过渡过程和带宽测试,不可避免地给传动系统带来冲击。本文设计了一套用于伺服系统测试的负载模拟装置,它可以模拟天线座的结构参数和电气参数,通过建立与电机测试平台的交互,验证电机在各